Mid infrared beam quality analyzer

Wincam-IR-BB

High resolution beam analysis system in mid to far infrared (2-16um)

Wincam IR achieves beam analysis of lasers in the mid to far infrared range through imaging solutions, with a 17um pixel and a measurable wavelength range of 2-16um, and an integrated shutter. Wincam has excellent beam profile analysis capabilities, with a signal-to-noise ratio of over 1000:1, and can achieve ISO11146 measurement of beam quality factor. The camera based on microcalorimeter has ultra-high sensitivity, and the integrated shutter can achieve fully automatic non-uniformity calibration.

Wincam IR has all the unique features of camera analyzers and is highly customizable. It is a user centered free operating software with unlimited software installation and free updates. The software can be used in conjunction with the M2DU platform to measure the M2 factor of the light beam. In terms of high-power laser measurement, we offer various sampling, absorption, and reflection attenuators to increase the maximum power limit of our camera analyzer.

System features:

·2-16um ultra wide wavelength range thermal radiation detector

·640 * 480,17um pixel

·Effective caliber of 10.8 * 8.2mm

·Low radiation capability:~ 75uW/cm2 noise between 5x peak values

·30FPS (7.5FPS output)

·Powered by USB 3.0; No need for other power blocks

·No chopper/TEC

·Integrated shutter allows

#Dynamic noise and baseline calibration software

#Automated Non Uniformity Correction (NUC)

·≥ 1000:1 root mean square noise of signal

·14-bit ADC

·14ms thermal time constant

#Measure pulse laser PRR ≥ 1KHz

·Parallel values on multiple cameras

·Analysis of Beam Propagation

#ISO11146M2 option

#Measurement of beam divergence angle

#Find Focus