The shaft seal device can adopt various forms such as machine seal, packing, labyrinth seal, etc. (determined according to user needs).
Due to different production process requirements of users, the mixer can be configured in various forms such as slurry, anchor, frame, spiral, etc. If there are any other requirements, please contact our factory for separate design and production.
Use and maintenance of mixing pot

1. It should be operated strictly according to the working pressure and temperature marked on the product nameplate to avoid danger.
2. Strictly follow the regulations on cooling, oil injection, and other aspects in the product manual, and do a good job in equipment maintenance and upkeep.
3. Typical mixing tanks are mostly atmospheric pressure equipment, and should be operated according to the operating procedures of atmospheric pressure equipment.
4. According to different production processes such as dairy and pharmaceutical companies that require high hygiene standards, strict attention should be paid to the cleaning and daily maintenance of mixing tanks and ingredient tanks. The user manual for cleaning and maintenance of visible equipment.
The materials used for the mixing pot body, mixing tank cover, mixer, shaft seal, etc. can be made of carbon steel or stainless steel according to different process requirements.
The upper part of the mixing pot cover is equipped with a transmission device (motor or reducer), which drives the mixer inside the mixing tank through the transmission shaft.
The mixing pot consists of a mixing tank body, upper and lower ends, a stirrer, a support, a transmission device, a shaft seal device, etc. Heating or cooling devices can also be configured according to process requirements.
The mixing pot body and mixing tank cover can be connected by flange sealing or welding. The mixing tank body and mixing tank cover can be equipped with process pipe holes for feeding, discharging, observation, temperature measurement, pressure measurement, steam distillation, safety venting, etc. according to process requirements.