Mold laser welding machine

√ No preheating treatment is required.
√ Small welding point diameter, small heat affected zone, can weld small and fine geometric areas, suitable for all sizes of plastic and hardware molds.
√ Welding is convenient and fast, and can be directly welded on the workpiece and repaired on the on-site machine without separation work.
The laser head can move and rotate back and forth, and can be electrically lifted and lowered. The workbench can move in X, Y, and Z directions.
√ Compensates for the shortcomings of traditional argon arc welding and cold welding in repairing fine welding surfaces. During repair welding, the heating range is small, and the workpiece will not deform or there will be no indentation around the weld pool.
Special argon gas protection ensures that the repair welding area and the surrounding welding pool will not burn or oxidize.
Under the microscope, small parts are clearly visible.
√ Various specialized welding rods, suitable for various materials, can be polished and etched after welding, without pores or sand holes, and without repair welding marks.

Technical Parameter

Sample image