▲ Product Introduction:
The XTA series trolley type motor specific drying oven is designed specifically to improve the safety and work efficiency of motor and electrical winding immersion drying, and is also suitable for heating and drying processes that require a large amount of ventilation during the heating process. This series of products has the advantages of good safety, excellent energy-saving effect, and good temperature uniformity, which can replace the non explosion proof electric blast drying oven commonly used in the motor and electrical industry with a high accident rate.
▲ Main performance characteristics:
1. Selected high-precision intelligent digital temperature controllers from home and abroad, programmable temperature control, with PID parameter self-tuning;
2. Install an over temperature alarm protection system that can emit sound and light alarm signals and automatically cut off the heating power supply when the temperature is abnormal;
3. Choose a reasonable hot air circulation method (bottom heating horizontal air supply, side heating vertical air supply, etc.) according to the different placement of the baked products, to make the temperature in the studio more uniform and achieve better drying and curing effects of the coils;
4. There is a track laid at the bottom of the oven, and the trolley is manually/automatically driven in and out by a motor on the track. The driving part is isolated from the working room to ensure its service life
5. A safe electric heater with low surface load and low surface temperature eliminates the main source of explosion hazards;
6. The box is equipped with explosion-proof doors, which can minimize losses in case of accidents.
7. The forced exhaust method of the high air volume motor throughout the entire process ensures that the concentration of hazardous gases inside the box remains within a safe range;
8. The full circulation ventilation method and unique hot air circulation system ensure that the equipment has good temperature uniformity throughout the entire heating process;
Due to extensive ventilation, the solvent vapor in the studio remains at a low concentration, which accelerates the evaporation rate of the solvent in the insulation paint of the dried winding, shortens the heating time, and improves work efficiency;
▲ According to user requirements, the following functions can be optionally selected:
1. The control cabinet can be selected according to user requirements, such as independent [purchased parts], wall mounted, connected, etc. for independent control or nearby control;
2. The insulation resistance tester can measure the insulation resistance of the baked winding at any time;
3. The temperature recorder records the temperature curve of the entire working process, and can be used with or without a paper recorder;
4. The drip tray can prevent insulation paint from leaking;
5. Computer centralized control system, one computer can remotely control the temperature control program setting, temperature curve recording and other functions of multiple drying ovens, with convenient operation and reliable control.
6. There are tracks laid at the bottom, and different trolley driving methods such as manual drive, motor self drive, and traction trolley drive can be selected according to the weight of the baked products;
7. Electrical control adopts touch screen PLC control
▲ BDA series immersion oven main technical parameters table

model	XTA-1	XTA-2	XTA-3	XTA-4	XTA-5
Studio size (width x depth x height) mm	1800×2000×1700	1800×2000×2000	1800×2600×1700	1800×2600×2000	1800×3000×2000
Working temperature (℃)	Room temperature -250	Room temperature -250	Room temperature -250	Room temperature -250	Room temperature -250
Working voltage/frequency (V/Hz)	3-380/50	3-380/50	3-380/50	3-380/50	3-380/50
Heating power (kw)	36	40	45	51	54
Temperature uniformity (℃)	±3	±3	±3	±3	±3
Temperature fluctuation (℃)	±1	±1	±1	±1	±1
Ventilation rate (M3/H)	500	500	700	700	1000
Solvent emission capacity (L/H)	2.5	2.5	3.5	3.5	5
Heat exchange efficiency (%)	80	80	80	80	80
Weight (T)	2.5	3	3.5	3.8	4

Product Attachment Description:
1. One copy of the instruction manual for random spare parts, one copy of the electrical component manual, one copy of the warranty certificate, and one copy of the certificate of conformity.
2. Warranty scope: The entire product is covered by a one-year warranty (excluding human damage), which includes all electrical components.
Our company can customize various non-standard models and sizes of electric heating equipment such as ovens, drying ovens, drying boxes, etc. according to customer requirements.
If the items you are baking contain volatile gases or corrosive substances, please explain in detail to our technical service personnel. If necessary, explosion-proof devices should be installed or corrosion-resistant materials should be used. Strictly prohibit baking explosive materials!
If you have any further questions, please contact our technical department: please refer to the company's official website.
If you need more detailed parameter information and individual product quotations, please contact the sales department:
Or send an email wjxthx@163.com
We will provide a response within 2 hours! Thank you for your interest in our product, and we look forward to working with you!