VIP member
NL116 Ethernet transmission and storage module
NL116 Ethernet transmission and storage module
Product details
- The NL116 comes with a flash card storage module and a 10baseT Ethernet interface, which can store observation data on a CF storage card and use TCP/IP protocol to connect the data collector and the entire observation system to a local area network or public network through twisted pair cables, enabling remote control of the observation system and network transmission of observation data. It is connected to the CR1000 or CR3000 data collector through a 40 pin peripheral port.
The NL116 network transmission and data storage module adds CF card storage function on the basis of NL120, which can support CF cards with a large capacity of up to 16GB. The obtained observation data will be stored in the CF card first, and then transmitted through the network according to the set instructions (it can also be stored directly without sending data), ensuring the security of the observation data.
Main technical parameters
Data transmission speed: 200~400 kbps
CF card requirement: Industrial grade, * * * supports 16GB
Power supply: 12V, powered by data collector
Current: 20mA (with only network function enabled), 43mA (with both network function and CF card storage function enabled)
Software: LoggerNet 3.2 or above, PC400 v1.3 or above, DevConfig 1.5 or higher
Working temperature: -25 ℃~50 ℃ (standard), -40 ℃~85 ℃ (extended)
Standard: EN55022-1：1995； EN50082-1：1992
Size: 10.2cm × 8.9cm × 6.4cm
Weight: 154g
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-