‍Knife measuring needle

The set tolerance of the cutting tool depends on the flatness and parallelism of the measuring tip towards the machine axis. To achieve these set tolerances, fine adjustments must be made to all probes and probe supports. If the diameter of the rotating tool needs to be calibrated, the direction of tool rotation must be opposite to the cutting direction.

Naming convention:

There are many specifications for machine tool probes, but they usually have universal M4 mounting threads or Ø 4mm mounting holes. For a square measuring tip with 4 faces, the length L is the distance from the measuring face to the installation face. For cubes and disks with 5 faces, the length is the distance from the measuring face to the front end face