Product Introduction:

HDBJ-200 NetworkNetwork alarm controller is a bus based alarm signal monitoring product that can be networked through a local area network. The system comes with a 7-way multi wire defense zone locally, and the bus can connect up to200 piecesBus defense zones can not only be applied in residential areas, but also widely used in various enterprises and institutions that require multi-level and centralized management, especially suitable for the supervision and management of anti-theft alarm systems by higher-level units to subordinate units.

Product Function Introduction:

1Networking: It can be connected to the upper management computer through a local area network.
2. Record: It can store various operations and alarm events and upload them to the upper computer.
3Printing: Configure a dedicated micro printer for real-time printing.
4. Programming: Can be doneEncode 8 operator passwords, 1 administrator password, 1 programmable password, system date, time, and various zone attributesCheng.
5. Local alarm: MainThe machine comes with 7 local defense zones (zone numbers: 201-207), of which zone 206 is the delayed alarm zone for entry/exit; Zone 201~205 is an instant alarm

a sector; DefenseZone 207 is a 24-hour alarm defense zone.
6. Remote alarm: Host communicationOver 485 busCan be connectedReceive up to 200 single address code zones (zone numbers: 1-200)）.
7. Defense deployment: The system can be deployed as a whole, individually, or continuously through the host keyboard and upper computer.
8. Deactivation: The system can be disarmed as a whole, individually, or continuously through the host keyboard and upper computer.
9. Bypass: The system can be operated as a whole, single zone, or continuous zone bypass through the host keyboard and upper computer.
10. Output control: The system motherboard has one alarm signal driver output, one timing node output, and one locking node output.
11. Linkage: The host sends an alarm to the overall systemThe line can drive 207 channels of driveActivate the output control board.
12. Anti disassembly: There is an anti disassembly switch inside the control box. When the system is disassembled, the system will drive an alarm to sound.
13. Main power failure indication: The system can detect the main power supply, and when the main power supply is disconnected, the alarm will give an indication.
14. Backup battery fault indication: When the backup batteryVoltage below 10.5V or not connectedAt this time, the system will provide instructions.
15. Monitoring of defense zone status: Monitor each defense zone of the system and promptly indicate the faulty defense zone.
16. Query: Records can be queried by date and time.
17. Electronic map: When an alarm occurs, the upper computer alarm software automatically pops up the alarm area map.