AmmoLyt online ammonia nitrogen monitor has compensated for potassium ion interference and does not require calibration, with good long-term stability. This online ammonia nitrogen monitor directly tests ammonia nitrogen in the medium without the need for sample pretreatment

Ammonia nitrogen online monitoring device=ammonia nitrogen sensor AmmoLyt+IQ Sensor Net system host

1、 AmmoLyt Ammonia Nitrogen Sensor (Ion Electrode Method)

Used in conjunction with IQ Sensor Net host for testing ammonia nitrogen in aeration tanks

characteristic:
Online monitoring of ammonia nitrogen, compensated for potassium ion interference
No need for calibration, good long-term stability
Quick response
Simple calibration
Aeration process control
Perfect equipment for DO testing
Save energy
Equipped with cleaning system, long operation period
The configuration is very economical and practical, with low investment and low operating costs

Direct testing of ammonia nitrogen in the medium - without the need for sample processing or sampling
In addition to dissolved oxygen testing, ammonia testing is also crucial in nitrification/denitrification processes. Controlling aeration through ammonia nitrogen testing can save a lot of costs. Therefore, a small investment in testing ammonia can yield significant returns - reducing energy consumption while ensuring water quality at the outlet. The new ammonia nitrogen testing system AmmoLytSystem includes a specially designed ammonia electrode that can be tested directly in the aeration tank. The electrode is installed in a special protective cover that can communicate directly with the IQSENSORNET system. The electrodes are controlled by the IQ SENSOR NET system for automatic maintenance and on-site air flushing. IQSENSORNET can also be installed and connected to other electrodes such as dissolved oxygen electrodes, suspended solid electrodes, etc.

System Description:
The ammonia nitrogen testing system consists of an ammonia electrode assembly AmmoLyt700 IQ with an automatic cleaning system. The ammonia reference electrode AmmoLytNHA and ammonia test head AmmoLytNHA/AT are connected to the ammonia electrode assembly through a plug. Each component of the system can be ordered and replaced separately, and the replacement is very simple and time-saving (no need to fill the electrolyte and replace the film).
The cleaning of the electrodes is carried out by triggering the solenoid valve (MIQ/CHV) with a relay in the IQSENSORNET system to activate compressed air (3-7bar). Like other IQ electrodes, the ammonia nitrogen test electrode can be automatically integrated into the IQSENSORNET system as long as it is plugged in, and all calibration and identification data are automatically uploaded by the system.

Ammonia nitrogen online monitoring instrument

2、 Introduction to IQ Sensor Net System Host:

1. Single point multi parameter testing system: 182 system (1 to 4 sensors)
◆ Can connect 1 to 4 sensors, suitable for situations with few testing points/parameters, such as testing 4 different parameters in one pool.
Multiple output information options available, such as RS485, MODBUS, PROFIBUS, or 0/4-20mA analog current output

2. Multi point distributed sensor testing network: 2020XT system (can connect up to 20 sensors)
◆ Up to 20 sensors can be connected, which is suitable for occasions with many test points. The distributed network system has advanced technology and excellent performance. The display terminal is mobile and supports hot plug
Multiple output signal modules are available for selection, such as RS485, MODBUS, PROFIBUS, or 0/4-20mA analog current output