1、 Product Introduction
QS-WTS
Due to the prolonged retention of water in tanks and pools, it can be contaminated by various microorganisms, bacteria, etc., resulting in water quality indicators that do not meet hygiene standards and causing secondary pollution of pool water. At present, more and more water is directly used for water tanks, and if secondary pollution is severe, it will threaten people's lives. To eliminate secondary pollution in water tanks and pools, it is necessary to disinfect the water appropriately and clean it regularly. However, various disinfection measures are currently cumbersome, costly, and sometimes require water cuts, causing inconvenience to users. The products produced by our companyQS-WTS
2、 Scope of application of water tank ozone self-cleaning sterilizer:
QS-WTS
3、 Function Description
QS-WTS
4、 Product composition structure
QS-WTS
5、 Installation and use of the product
1Install the electrical control cabinet in a dry and ventilated areaWaterproof and rainproof measures.
2The aeration section is connected to the control cabinet through pipelines.
3Connect220VPower supply, equipment starts working.
4When cleaning and maintaining the water tank, first cut off the main power supply of the electrical control cabinet.
6、 Working instructions for water tank ozone self-cleaning device
1Connect the circuit and gas path
2Press the power self-locking button, and the power indicator light will turn on
3Timer setting
matters needing attention:
The equipment must operate under water filling conditions. For the first test run, it needs to be started after water and electricity are connected.