Air purifier, small purification unit, dust-free workshop, food factoryworking principle

The fan unit of the air purifier sucks the pre filtered air into the static pressure box and sends it to the high-efficiency filter. In this way, clean air is blown out of the high-efficiency filter at a uniform cross-sectional wind speed, forming a clean area that meets the requirements.

install

1The air purifier should be installed in a purified or air-conditioned plant. Considering the service life of the purifier, it is recommended to install it in the plant0.5μmThe dust particles should be controlled within3500The grain/Within liters.

2.The air purifier can be installed horizontally or vertically in Yuyao, and the installation location should be away from high dust and vibration sources.

3When installing the air purifier, a cushion should be placed above the installation5mmThick latex sponge sealing gasket ensures sealing around and prevents short circuiting of air on the air outlet surface.

Air purifier, small purification unit, dust-free workshop, food factoryuse

1To ensure the cleanliness of the purification area, it is necessary to use it in advance before each useTurn on the device.

2The clean air blowing surface should face the work area that needs to be purified, and during this period, it should avoid blocking large areas of objects.

3Efforts should be made to avoid actions that significantly disrupt the airflow in the purification area.

4The number of units to be used can be determined based on the actual volume of the purified environment and the cleanliness achieved by the Euro Asia ratio, using the self purification specified rated air volume as the basis for the required number of awakenings.

5When using a self-cleaning device to renovate a vertical purification room, the installation position of the self-cleaning device should be arranged as evenly as possible.

6When using an adjustable self-cleaning device, the voltage can be adjusted by a voltage regulator to change the fan speed at the inlet and the average wind speed at the outletImprove the lifespan of high-efficiency filters.

maintain

1According to the cleanliness of the environment, regularly remove the non-woven filter material for cleaning, usually every three to six months (up to a maximum of six months). In general, when the coarse filter contains a lot of dust, the filter material turns black and can be removed for cleaning or replacement.

2Regularly (usually twice a year) use a dust particle counter to measure the cleanliness of the self-cleaning device. If it does not meet the technical parameters, adjust the fan operating conditions to meet the requirements, or replace the high-efficiency filter.

3After replacing the high-efficiency filter, it is necessary to remove the pressure edge in front of the self-cleaning device, take out the high-efficiency filter, and when replacing it with a new high-efficiency filter, pay attention to the arrow mark pointing in the direction of air flow.

4After replacing the air filter, applyY09-4Leak detection of dust particle counter, pay special attention to whether the sealing of the surrounding frame and the pressure frame in front of the self-cleaning device is good.

5After replacing the high-efficiency air filter, it is necessary to confirm that there is no leakage in the frame and conduct system testing to meet the technical specifications before normal operation can be carried out.

6Regularly inspect and repair electrical circuits, and promptly troubleshoot any malfunctions.