New intelligent PH controller. Shangtai PC-310A.

1. Taiwan SUNTEX's new PC-310A PH controller

2. One pH electrode HA405-90, 405-60 or ORP electrode (PT4805-60) from Swiss METTLER brand

(Special note: The measurement range of pH electrode 405-60 is pH 0.00-12.00, with two-point permeation, which is prone to blockage and not suitable for highly polluted wastewater.); The measurement range of HA405-90 is PH: 0.00-14.00, with a circular output, suitable for use in highly polluted wastewater )

3. One set of installation accessories for Taiwan SUNTEX (PP-100A)

4. SUNTEX Taiwan's pH standard Huai 2 bottles (one bottle each at pH 7.00 and pH 4.01, 500ml)

5. Shielding electrode dedicated cable 7-RG-58,10 meters It can also be equipped with BROADLEY-JAMES brand electrodes from the United States, commonly used models E-1312-ECI-M10ST or E-3055-ECI-M10ST. Standard Data for PC-310A (1-5)

Traditional Chinese introduction of PH controller:

Application of PH controller PC-310A:

Special outer box design, excellent waterproof and acid resistant effect, transparent front cover that is sun resistant, convenient for reading values; Two sets of ON/OFF control, STDBY function key, convenient for calibration and maintenance, avoiding control misoperation; Can be used in conjunction with PH-300T transmitters for low impedance signal transmission, with low interference and long-distance signal transmission functions; Suitable for use in special harsh environments, on-site processes, wastewater treatment, and fermentation tanks. There is also an LED model PC-310E available for purchase.

Characteristics and specifications of pH controller for acidity and alkalinity:

Measurement mode: pH/ORP.

Test range: 0.00~14.00 pH, ± 1999 mV.

Accuracy: 0.01 pH ± 1 digit, 0.1% ± 1 digit.

Temperature compensation: Fixed resistor or NTC temperature probe automatically compensates.

Display screen: 0.8-inch large LCD display with functional display.

Correction: Two point correction.

Control mode: Hi/Lo.

Signal output: isolated DC 4-20 mA output, * large load 500 Ω.

Voltage output: DC ± 12V output, providing power supply for PH-300T transmitter.

Power supply: 100~240 VAC ± 10%, 50/60 Hz.

Hole size: 135 (H) x 135 (W) x 195 (D) mm.

PH redox potential controller PC-310A.PH/ORP controller dual-use.