Product Details/PRODUCT DETAILS

Product features:

1. The machine adopts a horizontal structure, and the dual group circular slitting knife is easy to change quickly, which can be used for slitting and rewinding various types of film and paper;

2. The winding adopts a magnetic powder clutch structure, which has the advantages of no noise and stable output compared to mechanical tension adjusters.

3. Equipped with a waste blower device, it blows out excess scraps during thin material processing;

4. The host adopts PLC microcomputer control system and variable frequency speed regulation system, which is convenient to operate;

5. Simple operation control panel: Control of various parts of the machine, centralized panel operation.

6. Labeling instructions: After reaching the labeling length, the machine will automatically stop and the label mark indicating the film mouth will be attached to the platform.

7. Rear feeding method: Feeding from the back of the operating surface, equipped with rubber pressure wheels to reduce the noise of peeling tape, and smooth feeding.

Principle and purpose:

The traditional control scheme of the slitting machine is to use a large motor to drive the winding shaft, and a magnetic powder clutch is added to the winding shaft. By adjusting the current of the magnetic powder clutch, the obstacles generated are controlled to control the surface tension of the material. Magnetic powder clutch and brake are special automated actuators that transmit torque through magnetic powder filled in the working gap. By changing the magnetic current, the magnetic state of the magnetic powder can be altered, thereby adjusting the transmitted torque. It can be used for stepless speed regulation from zero to synchronous speed, suitable for manufacturing efficiency high-speed section fine-tuning and small to medium power speed regulation systems. It is also used in unwinding or rewinding tension control systems to regulate torque by adjusting current to ensure constant tension during the winding process.

Main technical parameters:

1. Machine speed (maximum): 150m/min

2. The maximum diameter of the unwinding material is between 600 and 1600

3. Maximum winding capacity: Φ500-Φ1200

4. Minimum cutting width 6mm

5. Cutting accuracy ± 0.1mm

6. Total power 10KW

7. Weight~3500KG