Due to the limitations of process equipment and procedures, traditional level gauges cannot be used for the ash hopper and ash conveying system of electrostatic precipitators. In the measurement of material level in the ash silo, due to the high height and large space of the ash silo, fly ash is severe, and traditional level gauges often cannot work properly.

Passive nuclear level gauges do not need to come into contact with the measured medium, and even the harshest environmental factors have no impact on them, so there is no wear problem; It measures the installation positionThe total amount of ash placed, container wallAfter all, there is a significant difference in the total amount between the amount of ash hanging and the actual material filling, so it is possible to distinguish whether it is hanging or the actual material level, overcoming the problem of hanging, and maintaining and replacing it conveniently without affecting the operation of the main body. The main advantages are as follows:
1. No false alarms caused by severe fly ash or hanging materials；
2. Non contact measurement, suitable for sealed containers;
3. The trend change of material level can be determined based on the output signal;
4. Easy installation and maintenance, without the need for unit shutdown or drilling operations.

1、 Anti container wall hanging material

The measurement is the total amount of ash in the equipment orientation. After all, there is a significant difference in the total amount between the wall mounted ash amount of the container and the actual full material, so it is not affected by the hanging ash and can accurately measure whether it is full.

2、 Wireless long-distance debugging

The remote control can be used to wirelessly control the probe for debugging, and it can also be debugged at the probe or remotely through the wireless host.

3、 Long lifespan

1. There is no constraint on the lifespan of traditional nuclear level gauges.

2. No loss components, no lifespan constraints, no protection, low operating costs.

3、 Anti dust

The measurement is the total amount of ash in the equipment orientation. The condition of the fly ash in the container is significantly different from the actual full condition in terms of total amount, so it is not affected by fly ash and can accurately measure whether the material is full.

4、 Equipment Brief

1. The explosion-proof casing is equipped with a grounding terminal, and the equipment should be securely grounded.

2. The equipment is located outside the body and even outside the insulation layer, so the equipment and protection are very convenient. Even when the device is in operation.

5、 Widely applicable and measurable

1. Materials without radioactivity (materials with radioactivity levels lower than environmental radioactivity), such as water.

2. The interface between ash and water (the interface between radioactive and non radioactive materials).

3. Materials with weak radioactivity (the level of radioactivity of the material is equivalent to that of the environment), such as certain stones and ores.

4. Radioactive materials (materials with higher levels of radioactivity than the environment), such as coal ash, coal slag, asphalt, cement, etc.

6、 Resistant to harsh environments

1. Environmental temperature:- 45 ℃ -75 ℃.

2. Explosion proof products can be used in harsh environments that are flammable and explosive.

3. Power supply: Wide voltage input, strong adaptability.

4. Protection: The detector is made of stainless steel and has a fully enclosed structure with a protection level of IP66.

The above are the primary application features that we have specifically introduced for us. In addition to the above introduced features, another outstanding feature is the measurement of analog quantities. The percentage of analog output gray amount, perhaps the gray level height, is intuitive and clear; The flashing numbers reflect the process of changing the gray position, which is very beneficial for the staff to avoid the working condition of the gray system.

Power supply: AC220V or DC24V;

Response time: 5-30 seconds;

Provide a set of passive normally open and normally closed points.

Containers for storing mineral materials, such as powder coal bunkers.