VIP member
Product details
Introduction to Fiber Laser Marking Machine Models
The photo fiber laser marking machine is roughly the same as the ordinary fiber laser marking machine. The ordinary fiber laser marking machine can also produce photos, but there is still a slight gap in the effect compared to the photo laser marking machine. The photo fiber laser marking machine has greatly improved its bitmap adjustment function, increasing the ability to adjust DPI clarity. Like our M series fiber laser marking machine, it has added Q pulse and ultra wide frequency adjustment range. It can also be said that the M series fiber laser marking machine is the same machine as the photo fiber laser marking machine.
Features of Fiber Laser Marking Machine Models in Photos
The photo fiber laser marking machine has a high electro-optical conversion rate, using a third-generation solid-state fiber laser with an electro-optical conversion efficiency of up to 60%. It has excellent beam quality M2<1.4, good beam quality, and a focused spot diameter of 10um. The divergence angle is 1/4 of that of semiconductor pump lasers, making it particularly suitable for precision and fine marking machines with large panel sizes. Laser engraving for larger products is also not a problem. The machine is made of double-layer thickened 1.5 sheet metal, greatly improving its load-bearing capacity. Long term use of heavy objects will not cause deformation of the machine. The photo fiber laser marking machine also uses the unique guiding characteristics of optical fibers to transmit the LD light source to the laser isolator through fiber transmission. After beam amplification, the output laser beam quality is more than 4 times better than that of semiconductor laser.
Structural analysis of photo fiber laser marking machine
Photo fiber laser marking machine parameter table
Application scope of photo fiber laser marking machine
The photo fiber laser marking machine is mainly used for: plastic photo effects, metal photo effects, alumina black effects, stainless steel color effects. Other application ranges are the same as ordinary fiber machines, mainly used for laser marking of circular objects. Like ordinary fiber laser marking machines, it is increasingly widely used in daily life. It is widely used for ordinary metals and alloys (all metals such as iron, copper, aluminum, magnesium, zinc, etc.), rare metals and alloys (gold, silver, titanium), metal oxides (all kinds of metal oxides can be used), special surface treatment (phosphating, aluminum anodizing, electroplating surface), ABS plastic (electrical appliance shells, daily necessities), ink (transparent buttons, printed products), epoxy resin (electronic components). Marking of graphics and text in various fields such as packaging and insulation layers.
Precautions for using the photo fiber laser marking machine
When using the photo fiber laser marking machine, it is strictly prohibited to look up from below the laser galvanometer, as this may cause permanent damage to the eyes due to the laser beam entering.
2. When the photo fiber laser marking machine is working, it is important not to suddenly turn off the power, as this may cause the laser software to be lost or even the computer to fail to open properly. The hardware part of the machine may also be damaged. It is recommended to equip it with a PUS power stabilizer.
3. Do not frequently move the photo fiber laser marking machine, as the optical components inside the machine have been adjusted for position and angle at the factory. Frequent movement of the position can cause the internal components to change angle due to vibration, making the machine unusable.
When it is not applicable for a long time, the main power supply needs to be disconnected.
5. Do not browse high-risk websites on the computer of the photo fiber laser marking machine to prevent laser engraving with garbled characters after being infected with viruses.
6. Machine equipment needs to be effectively grounded. Some customers' power sockets do not have grounding wires, which can cause static electricity and users may frequently come into contact with static electricity.
Photo fiber laser marking machine after-sales service
Photo fiber laser marking machine delivery list: delivery note, metal adjustment plate, tool set, training service list;
Photo fiber laser marking machine after-sales and service: home delivery, technical engineer on-site installation, debugging and training, lifelong technical support, lifelong software free upgrade, 2-hour response after sales, on-site processing within 24 hours, after-sales phone: 400-829-662
The photo fiber laser marking machine is roughly the same as the ordinary fiber laser marking machine. The ordinary fiber laser marking machine can also produce photos, but there is still a slight gap in the effect compared to the photo laser marking machine. The photo fiber laser marking machine has greatly improved its bitmap adjustment function, increasing the ability to adjust DPI clarity. Like our M series fiber laser marking machine, it has added Q pulse and ultra wide frequency adjustment range. It can also be said that the M series fiber laser marking machine is the same machine as the photo fiber laser marking machine.
Features of Fiber Laser Marking Machine Models in Photos
The photo fiber laser marking machine has a high electro-optical conversion rate, using a third-generation solid-state fiber laser with an electro-optical conversion efficiency of up to 60%. It has excellent beam quality M2<1.4, good beam quality, and a focused spot diameter of 10um. The divergence angle is 1/4 of that of semiconductor pump lasers, making it particularly suitable for precision and fine marking machines with large panel sizes. Laser engraving for larger products is also not a problem. The machine is made of double-layer thickened 1.5 sheet metal, greatly improving its load-bearing capacity. Long term use of heavy objects will not cause deformation of the machine. The photo fiber laser marking machine also uses the unique guiding characteristics of optical fibers to transmit the LD light source to the laser isolator through fiber transmission. After beam amplification, the output laser beam quality is more than 4 times better than that of semiconductor laser.
Structural analysis of photo fiber laser marking machine
Photo fiber laser marking machine parameter table
Application scope of photo fiber laser marking machine
The photo fiber laser marking machine is mainly used for: plastic photo effects, metal photo effects, alumina black effects, stainless steel color effects. Other application ranges are the same as ordinary fiber machines, mainly used for laser marking of circular objects. Like ordinary fiber laser marking machines, it is increasingly widely used in daily life. It is widely used for ordinary metals and alloys (all metals such as iron, copper, aluminum, magnesium, zinc, etc.), rare metals and alloys (gold, silver, titanium), metal oxides (all kinds of metal oxides can be used), special surface treatment (phosphating, aluminum anodizing, electroplating surface), ABS plastic (electrical appliance shells, daily necessities), ink (transparent buttons, printed products), epoxy resin (electronic components). Marking of graphics and text in various fields such as packaging and insulation layers.
Precautions for using the photo fiber laser marking machine
When using the photo fiber laser marking machine, it is strictly prohibited to look up from below the laser galvanometer, as this may cause permanent damage to the eyes due to the laser beam entering.
2. When the photo fiber laser marking machine is working, it is important not to suddenly turn off the power, as this may cause the laser software to be lost or even the computer to fail to open properly. The hardware part of the machine may also be damaged. It is recommended to equip it with a PUS power stabilizer.
3. Do not frequently move the photo fiber laser marking machine, as the optical components inside the machine have been adjusted for position and angle at the factory. Frequent movement of the position can cause the internal components to change angle due to vibration, making the machine unusable.
When it is not applicable for a long time, the main power supply needs to be disconnected.
5. Do not browse high-risk websites on the computer of the photo fiber laser marking machine to prevent laser engraving with garbled characters after being infected with viruses.
6. Machine equipment needs to be effectively grounded. Some customers' power sockets do not have grounding wires, which can cause static electricity and users may frequently come into contact with static electricity.
Photo fiber laser marking machine after-sales service
Photo fiber laser marking machine delivery list: delivery note, metal adjustment plate, tool set, training service list;
Photo fiber laser marking machine after-sales and service: home delivery, technical engineer on-site installation, debugging and training, lifelong technical support, lifelong software free upgrade, 2-hour response after sales, on-site processing within 24 hours, after-sales phone: 400-829-662
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-