Picarro G2301Environmental, impact, and vibration tests (conducted on each analyzer)

Thermal temperature change test (whole instrument)

exceed 12 Test the working temperature step by step for hours, starting from5 ℃reach40 ℃Every increase5 ℃Maintain afterwards 40 minute.

Verify performance specifications throughout the entire testing scope.

Long term thermal testing (entire instrument)

The working temperature is tested step by step for a week, starting from30 ℃reach40 ℃Every increase5 ℃Maintain afterwards 40 minute.

Verify performance specifications throughout the entire testing scope.

Storage testing (whole instrument)

stay-10 ℃and50 ℃Constant temperature storage (not working)+Performance confirmation after testing

Vibration testing

Two axes,25 Hz，1gp-pAcceleration, per axis 15 minute

useMIL-STD 810FConduct impact testing

Lift the analyzer to one side4Inch height, then release it to drop onto a hard surface (test bench).

All of them 12 Edge（x、y、zPerform the impact test on all axes, with each edge tested twice

Power interruption test

at least 5 Successful AC power outage and restart

Picarro G2301Ensure performance specifications (in air)

CO₂

CH₄

H₂O

Accuracy（1-σ: Initial 5 second/ 5Ensure accuracy of minute average data under the following specified operating conditions

< 70 ppb / 25 ppb

< 0.5 ppb / 0.22 ppb

< 80 ppm / 30 ppm

Maximum drift under standard temperature and pressure（24 hour/Monthly)

*（50 The difference between the maximum values of the minute averages

Ensure drift under the following specified operating conditions

< 120 ppb / 500 ppb

< 1 ppb / 3 ppb

< 100 ppm ±0.5%reading

Automatic determination of dry mole fraction

Already included

Already included

Not applicable

measuring range

0–1000 ppm

0–20 ppm

0–7 %v（39 ℃Dew point)

Under non condensing conditions

Ensure accuracy range

300–700 ppm

1–3 ppm

0–3 %v（25 ℃Dew point)

Under non condensing conditions

Measurement interval (data acquisition rate)

< 5second

< 5second

< 5second

Gas response: rising/Descent time( 10–90% / 90–10% )

< 3second

< 3second

< 3second

Measurement pool control

Temperature:±0.005 ℃Pressure:±0.0002Atmospheric pressure