After years of development, we have been able to produce various series of crushing equipment, such as PE, PET, PP, PVA. Nylon crushing equipment, ultrafine classifiers, and so on.

PE, PET, PP, PVA. Nylon crushing equipment product description: In addition to impact crushing function, this machine also has advanced jet high-speed vortex and ultrasonic impact function. The high-speed airflow generated can also take away the heat generated during crushing, avoiding local overheating and suitable for crushing various special materials and heat sensitive materials. This type of machine has the special function of simultaneous drying and crushing operation as long as hot air is introduced. Therefore, it not only has high crushing efficiency and fine powder, but also can process tough, fibrous, and wet materials with high moisture content that are difficult for general micro powder machines to crush. Its powder crushing rotor consists of several horizontal disks and vertical blades, forming many staggered crushing chambers. The air inside the chamber is elastic and can freely vibrate. When the rotor is working, it can generate jets and eddies, causing materials to rub and collide with each other and break into fine powder. There is also an overflow pipe above the fuselage, and unqualified particles can be returned for re crushing to ensure the fineness requirements of the product.

DESCRIPTION

After the material is added from the top of the upper box, it is quickly dispersed by the pre crushing blades on the upper part of the rotor, scattered towards the four walls of the stator, and enters the crushing zone composed of the rotor and stator. The large amount of air flow generated by the ultra high speed rotation of the rotor is influenced by both the rotating and stationary components inside the machine, as well as the proper guidance of the fan, and is transformed into countless rapid turbulent flows. These numerous air turbulence in the crushing zone drive the material and accelerate it to the same high speed as the airflow. However, the direction and speed of these materials suddenly change in an instant, which is also the principle of this crusher. The particles of each material collide with each other and complete ideal cracking in high-speed airflow. Only a small portion of particles are refined through the impact of internal motion and stationary components. During the entire residence period of material particles in the ZWV cyclone mill, they are always surrounded by air flow. Therefore, the heat inevitably generated during the ultrafine grinding process is also carried away by the air flow as the grinding medium. The high flow of air and its rapid turbulence ensure minimal temperature rise. The above high-speed crushing principle makes the ZWV cyclone mill without screening device particularly suitable for providing technically safe and economically beneficial solutions for grinding and drying operations.

To achieve the desired fineness and yield, the height of the gap gasket can be increased or decreased to change the gap between the rotor and stator, thereby controlling its yield and fineness.

Product Description

This model is particularly suitable for crushing heat sensitive materials, especially PE, PET, PP, PVA, nylon and other materials. Two rotors move relative to each other, and the relative speed between the teeth is significantly higher than that of a typical plastic crusher. The cutting ability for tough materials is also greater than that of typical plastic crushing equipment, and the crushing fineness and output are much better than similar products. Another feature of this device is that the gap between the two toothed discs can be adjusted freely by adjusting the handle without stopping the machine.