VIP member
Polytetrafluoroethylene Beile tube
Brief description: PSC-99 polytetrafluoroethylene Beile tube is made of 100% polytetrafluoroethylene, reusable, corrosion-resistant (resistant to stro
Product details
PSC-99 PTFE Beile tubeMade of 100% polytetrafluoroethylene, reusable, corrosion-resistant (resistant to strong acids and alkalis), non greasy, and easy to clean.
The opening is a 'V' - shaped notch to ensure accurate water flow into the circular thread design for easy cleaning
The diameter of the sampling tube is very small, which can take water samples from deep water wells with small diameters. It is a simple and cost-effective water quality sampler
The check ball is locked in place, so it won't roll to the other end of the tube
Operation steps:
1. Check for leaks: After cleaning the burette, first check if the plug rotates flexibly and if there is any leakage. First, close the stopcock, fill the burette with water, and use filter paper to check around the stopcock and at the tip of the tube. Then rotate the plug 180 degrees, stand upright for two minutes, and use filter paper to check for water leakage.
2. Sample preparation: Add the sample to be tested into the tube.
3. Add reagents: Add the corresponding reagents to the tube according to the experimental needs.
4. Mixing: Thoroughly mix the reagents and samples in the tube.
5. Sample extraction: Extract the mixed sample from the tube.
6. Analysis: Analyze the extracted samples.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-