monitor

Lightweight and user-friendly interface.

Multi functional probe

By using a probe, the position of the steel bars can be determined, and the thickness of the protective layer and the diameter of the steel bars can be measured.

display

Display the detection results in a graphical format.

PROFOMETER 5 can easily locate steel bars, detect the thickness of concrete protective layer and steel bar diameter, with high accuracy.

PROFOMETER 5 steel reinforcement protection layer tester is a lightweight instrument that uses electromagnetic pulse method for non-destructive testing.

There are two models of PROFOMETER 5: S-type and Scanlog type.

S-type: The S-type is the basic model and has the following functions:

Position of steel bars

Detecting the thickness of the concrete protective layer

Store individual detection data and calculate evaluation statistics

Detecting the diameter of steel bars

There are multiple methods to help locate:

Current value: Distance from the surface of the steel bar to the surface of the concrete

Flow signal strip: The movement of the signal strip can indicate whether the probe is close to the steel bar

Sound: The probe will make a sound when passing through the steel bar axis backwards

Sound change: The closer the probe is to the steel bar, the louder the sound

Signal value: distance from probe to steel bar

Measuring with Statistics function

The minimum thickness of the protective layer measured is stored in Memo.

Press the button to obtain the statistical values of the previous stored values.

RS 232 interface:

- Print directly through an external printer

- Data can be transmitted to a PC for further analysis

Display printed statistical data and transfer it to an Excel spreadsheet

Detect the diameter of dense and parallel steel bars

Accurately mark the axial position of the steel bars on the surface of the concrete. Measure the spacing between steel bars and input it into the instrument.

Then the instrument will automatically calculate the diameter of the steel bar and display it.

Detecting areas with insufficient protective layer

Inspection after dismantling the template

quality

Provide evaluation basis for repair

By using pre-set limit values, moving the probe can detect areas where the protective layer is insufficient,

Without the need to observe the displayed values. If the protective layer is insufficient, sound will be emitted.

SCANLOG type: In addition to the advantages of the S-type, it also has additional functions:

CyberScan software can display the distribution of steel bars in images

The Measuring with Grid software can display the thickness of the protective layer of concrete in grayscale format

Probe carrying device with built-in distance sensor

CyberScan software makes steel bars clearly visible

There are three types of rulers to choose from: 0.5 × 0.5m, 1.0×1.0m,2.0×2.0m.

Detection range and accuracy of protective layer thickness for a single steel bar

Diameter of steel bar (mm)

#Reinforcement diameter (inches)

——Accuracy requirements of BS 1881:204 specification

± 2mm or 5%

And the detection accuracy of PROFOMETER 5 is BS

1.5 times the accuracy requirement!

resolution

This figure shows the minimum spacing a between steel bars with a diameter of d that can still be resolved independently as a function of the thickness S of the concrete protective layer.

Example: Steel bar diameter d=16mm

Concrete layer thickness s=55mm

Minimum spacing between steel bars a=17mm

S-type basic configuration:

monitor

The monitor comes with memory and can store 100000 test values, which can be divided into 63 groups,

128 × 128 LCD display with RS232 interface,

Print statistical values and transfer them to PC software,

A battery with a working time of 45 hours and a working temperature of -10~60 ℃.

Multi functional probe

This probe can automatically compensate for the effects of magnetic aggregates or special cement.

Connect a probe with a length of 1.5m.

straps.

headset.

3.5-inch disk for data transmission.

Carrying case 463 × 365 × 107mm, weighing a total of 2.4kg.

S-type can be upgraded to Scanlog type.

Basic configuration of Scanlog type:

In addition to the S-type configuration, it also includes:

Probe carrying device with built-in distance sensor, with a wiring length of 1.55m

Data transmission cable 1.5m

Conversion interface serial/parallel port, 2.0m long

Attachment (applicable to both models)

Marking pen for the extension rod multifunctional probe of the test block multifunctional probe or scanning device