HDM programmable multi-stage digital display constant temperature magnetic stirring electric heating sleeve

Brief introduction

This electric heating sleeve adopts a multi-stage digital temperature control method, and users can set the time period and heating rate according to their needs. Adopting microcomputer automatic adjustment technology, the temperature control accuracy is high. The brushless DC motor used for mixing has stepless speed regulation and can operate continuously for a long time. Widely used in pharmaceuticals, medicine, agriculture, forestry, animal husbandry, environment, science, aquaculture, colleges and universities, scientific research, and industrial and mining sectors. This product uses high-temperature resistant glass fiber as insulation material, enclosing the electric heating element in the insulation layer, which is safe, energy-saving, fast heating, and good insulation.

2、 Basic parameters

1. Power supply voltage 220V 50HZ

2. Mixing capacity 1000ml

3. Temperature control range: Room temperature+10 ℃ -300 ℃

4. Temperature control accuracy ± 0.5 ℃

5. Mixing speed start -2000r/min

6. Overall power of 500W

3、 Usage and maintenance

(1) After repeated use, smoke will appear inside the electric heating sleeve, which is caused by the evaporation of oil and grease on the surface of the glass fiber. After powering on several times, this phenomenon will not occur.

(2) This product should be slowly heated when exposed to moisture to allow it to dry before resuming use.

(3) Refer to the temperature controller manual for temperature setting.

(4) After finishing the work, first adjust the speed knob to the minimum value and turn off the power switch.

(5) If not in use for a long time, the plug should be removed from the socket.

4、 Precautions

Before operating this product, it is necessary to carefully read the user manual of the temperature controller. If you encounter any difficulties, please contact our company. The working power supply must have good grounding measures. When the instrument is in working condition, it should be supervised by a dedicated person!