Purification sampling vehicleDifferent names:Clean sampling vehicleUltra clean sampling vehicle, sampling vehicle. The purification sampling vehicle is suitable for sampling raw and auxiliary materials of drug preparations and sterile preparations. Purification sampling vehicle is a vertical flow local air purification device that purifies indoor air from the moment it passes throughPrimary FilterFiltering, achieving a high cleanliness working environment through the exhaust of high-efficiency air filters.

Overview of Purification Sampling Vehicle Products:
Mobile purification sampling vehicle is a simple equipment that provides a local purification working environment for raw material sampling. It has the advantages of low cost, simple use, and mobility, and is adopted by most GMP certification units.

Principle of Purification Sampling Vehicle:
The mobile clean sampling vehicle adopts a centrifugal fan system to suck in air, and passes throughmedium efficiency filterThe laminar flow hood evenly outputs clean air into the work area to achieve the required purification level, and is equipped with different power outages for easy sampling and use.

The purification sampling vehicle is a multifunctional and movable sampling room designed and developed according to GMP standards and your suggestions. The cleanliness level of this equipment reaches Class 10000 (up to Class 100), making it easy to sample raw and auxiliary materials for pharmaceutical preparations (excluding sterile preparations). This device has the advantages of simple structure, beautiful appearance, flexible mobility, affordability, and easy use. It is an essential equipment for implementing Article 26 of GMP in the pharmaceutical industry sampling. The width of the operating surface can be processed and manufactured according to user requirements.

Instructions for using the purification sampling vehicle:
1. Move the clean sampling vehicle to the location where sampling is required and fix the sampling vehicle (brake); Connect the power, turn on the power switch, and turn on the fan switch;
2. The fan starts working, adjust the voltage to an appropriate level (usually 220V), wait for the ultra clean sampling vehicle to run for 15 minutes, and then put it into the sampling bucket;
3. After the sampling is completed, remove the sampling bucket, turn off the fan and power, unplug the power cord, and move the sampling vehicle to its original position.

This purification sampling vehicle is designed and manufactured according to GMP standards, with a cleanliness level of one hundred to ten thousand, suitable for use in dust-free environments, and commonly used for sampling raw materials of pharmaceutical preparations (excluding sterile preparations). The centrifugal fan and other main components used in this sampling vehicle comply with the requirements of GB1497-87 (Safety Standard for Electric Motors).

Advantages of Purification Sampling Vehicle:
The product structure is composed of stainless steel plates or spray coated steel plates, with computer-controlled light touch points. The fan has stepless speed regulation, and the air volume can be adjusted freely. It is equipped with ultraviolet sterilization lamps, and the specifications and dimensions can be customized according to customer requirements.

Purification sampling vehicle configuration:
1. Equipped with 1 aluminum frameNo partition high-efficiency filterThe filtration efficiency is: 99.99@0.3 μ m and 1 unitG4 level primary filterEnsure purification level, static 100 level US Federal 209E standard;
2. The two sides of the work area are stainless steel baffles, and the front and rear are strip-shaped anti-static and dust-proof curtains, achieving the ideal dust-proof effect;
3. Equipped with a large air volume and low-noise imported fan of 0.165KW, ensuring a wind speed greater than 0.45m/s;
4. Equipped with an imported differential pressure gauge, it clearly indicates the pressure difference on both sides of the high-efficiency filter and promptly reminds you to replace the high-efficiency filter;
5. Adjustable speed fan design with stable speed regulation performance, ensuring constant air flow even under the final resistance of the high-efficiency filter;
6. Equipped with adjustable feet and universal wheels, it is easy to move and move, and the positioning is stable and safe;
7. Stainless steel inner bottom orifice plate, easy to place and remove.

Technical parameters of the "Zijing" purification sampling vehicle:

Sampling vehicle installation confirmation:
Appearance: The paint surface should be smooth and flat, with no peeling or detachment of the coating. The decorative curtain should be smooth, vertical, and free of damage. Inspection method: Visual inspection.
Check whether the unpacking inspection meets the requirements and establish a complete equipment file.
Check if the SOP for the use of the equipment has been drafted and if appropriate training has been provided to the users.

Sampling vehicle operation confirmation:
Wheels: flexible and reliable. Inspection method: Visual inspection and manual testing.
Illuminance: The illuminance at each point shall not be less than 300Lx. Inspection method: The illuminance at a height of 60cm from the ground shall be measured by an illuminance meter at three points, with three measurements taken at each point.

Purification efficiency of the sampling vehicle:
Dust particle count: The number of particles larger than 5.0 μ m is less than 20000/m3, and the number of particles larger than 0.5 μ m is less than 3500000/m3. Inspection method: Adjust the wind speed to low, medium, and high levels, and test with a dust particle counter at a height of 80cm-100cm from the ground. Measure three points per level, and measure three times at each point.
Settling bacteria: ≤ 10 settling bacteria, measured at three points, each point measured three times.
Pressure difference: The pressure difference between the inside and outside of the vehicle is greater than 10Pa. Inspection method: Use a micro differential pressure gauge to measure the pressure difference at three points, with three measurements taken at each point.

Requirements for after-sales service time of purification equipment:
Whether it is paid after-sales service or free after-sales service, customers provide feedback on equipment after-sales issues to Zijing. After our company provides a solution and the customer confirms the solution:
1. Arrive at the site within 24 hours within the Pearl River Delta and Yangtze River Delta to solve after-sales service problems;
2. In other areas, it is generally within 48 hours to arrive on-site to solve after-sales service problems, while in special remote areas, it is up to 96 hours to arrive on-site to solve after-sales service problems.
Original source: Guangzhou Zijing http://www.zj-filter.com/ Li Gong (139-2875-8616)