(1) The surface temperature can reach up to 1420 ℃

(2) The surface is stainless steel color (very bright, to be noted when identifying by customers), will not rust, and will not fall off slag no matter how long it is used.

(3) Good resistance balance and temperature field balance

(4) Heating element: Kanthal A1 imported resistance wire from Sweden (resistance wire can be guaranteed for 2 years)

When the circuit experiences overcurrent or leakage, the circuit will automatically disconnect

The furnace is equipped with communication interfaces and software, which can directly control various parameters of the furnace through a computer, and observe the PV and SV temperature values and instrument operation on the furnace from the computer. The actual heating curve of the furnace will be drawn in real time by the computer, and the temperature data at each moment can be saved, and the vacuum degree can be adjusted at any time.

(1) High quality high-purity alumina polycrystalline fiber solidification furnace formed by vacuum suction filtration.

(2) Adopting Japanese technology for molding.

(3) The spacing and pitch of the resistance wires in the furnace are all arranged according to the best thermal technology in Japan, and the temperature field is simulated through thermal software

(4) Using 4-week heating, the temperature field is more balanced

(All imported electrical appliances certified by UL)

Adopting Yudian program temperature control instrument (standard)

1. Generally, TW-1.5A can be used for rough vacuuming and expelling the gas from the furnace tube
2. The 2XZ-2 vacuum pump can pump the vacuum degree of the tube furnace tube to around 10Pa
3. The VS-0.1 vacuum system is capable of pumping the vacuum degree inside the tube furnace to 0.1Pa (and equipped with a resistance vacuum gauge display)
4. The VS high vacuum system (composed of molecular and mechanical pumps) is capable of pumping the vacuum inside the tube furnace to 10-3 Pa

The flange interface can be transformed:

1. In order to increase the pumping rate and achieve higher vacuum requirements. The original hose connector can be replaced with KF-25 interface (both VS-0.1 and VS high vacuum system interfaces are KF25)
2. If used in the gas supply system, the original hose connector can be replaced with a Φ 6.35mm double socket connector

Pirani capacitance vacuum gauge (optional)PCG554 (anti-corrosion) or PCG550 interface KF16