Use a steam bath for cleaning This cleaning machine adopts bubble cleaning and is suitable for cleaning leafy vegetables. It can be customized according to the quality requirements of the product. The equipment is made of stainless steel materials, except for standard components such as motors and bearings, which fully comply with the hygiene requirements for exported food. The equipment is equipped with a bubble generation device to make the material roll and remove pesticide residues on the surface of the product. At the same time, an appropriate amount of chemicals can be added for toxic fixation. Floating materials can overflow from the overflow tank, and sediment can be discharged from the sewage outlet to achieve the purpose of cleaning.

Scope of use: This device is widely used for cleaning vegetables such as chrysanthemum, chives, eggplants, tomatoes, etc. The device is easy to operate, labor-saving, safe and hygienic, and the cleaned materials can be directly ingested. A bubble cleaner is a device that uses high-pressure bubble water bath to invert vegetables and fruits in water. It is equipped with devices such as a hair roller to remove hair and a drum to remove impurities, effectively separating sediment, impurities, and dirt on the surface of vegetables. The size of the water flow can be controlled, and the cleaned dirt is intercepted by a filter screen. The cleaned vegetables are lifted by a conveyor belt into the next process and sprayed again during the lifting process. During the work process, the inlet pipe and sprinkler pipe always supply water, gradually replacing the sewage in the water tank.

Instructions for using the fully automatic vegetable washing machine:
The cleaning equipment consists of main parts such as tank body, inner tank body, sediment isolation net, lifting device, and bubble generation device
Operation steps of fully automatic vegetable washing machine:
(1) Clean the water tank thoroughly and fill it with water; Inject clean water into the main tank until water overflows from the overflow port.
(2) Start the conveyor belt motor to ensure normal operation and correct direction of the belt;
(3) Start the vortex pump to inject air into the water tank, causing the water inside the tank to churn;
(4) Open the spray pipe valve to evenly spray water onto the mesh belt;
(5) Check all operating parts and confirm that they are functioning properly before starting work.
(6) Depending on the degree of cleaning of the material, it can be cleaned separately before being transported by the mesh belt