Rare earth milling equipmentProfessional manufacturer - Shanghai Kunke Road and Bridge, providing you with the highest qualityRare earth grinding equipment，Rare earth processing equipment，Rare earth powder milling equipment.

The use of rare earths:
Adding rare earth metals, fluorides, and silicides to steel can refine, desulfurize, neutralize low melting point harmful impurities, and improve the processing performance of steel; Rare earth ferrosilicon alloy and rare earth silicon magnesium alloy are used as spheroidizing agents to produce rare earth nodular cast iron. Due to their special suitability for producing complex nodular iron parts with special requirements, these nodular cast irons are widely used in mechanical manufacturing industries such as automobiles, tractors, and diesel engines; Adding rare earth metals to non-ferrous alloys such as magnesium, aluminum, copper, zinc, and nickel can improve the physical and chemical properties of the alloys, as well as enhance their mechanical properties at room temperature and high temperature.

Rare earth milling equipmentPerformance characteristics:
The rare earth milling machine is different from the previous Raymond milling machine. It is a new type of milling equipment developed by our company based on some characteristics of rare earths. Its main feature is that the angle of the snail shell of the main engine has been changed from a right angle to a circular arc shape. The improved air duct snail shell has less air loss and increased material fluidity in the air duct; The improved rare earth milling machine's grinding roller device adopts an increased linkage of the grinding roller total bearing, which can greatly improve the utilization rate of vulnerable parts such as grinding rollers and grinding rings.

Rare earth milling equipmentThe working process:
Rare earth raw materials are transported to the material bin by a hoist or belt conveyor, and then uniformly fed into the grinding mill by an electromagnetic vibration feeder. The grinding roller device in the main machine is driven to rotate by a reducer, and the shovel located at the lower part of the grinding roller bearing is used to shovel the material between the grinding roller and the grinding ring. The grinding roller itself rotates due to friction, crushing the material. In the grinding chamber, there is a certain amount of water content in the material being ground, which generates heat during grinding and causes the indoor gas to evaporate, changing the air flow rate. In addition, some pipes are not tightly sealed, and external gas is sucked in, increasing the circulating air flow rate. To achieve airflow balance, the fan and the residual air duct of the main unit are adjusted, and excess gas is introduced into the small cyclone collector to collect the fine powder brought in by the residual gas. Finally, the residual gas is discharged into the atmosphere through the upper exhaust pipe of the small cyclone collector or guided into the vacuum cleaner to purify the exhaust gas.

Rare earth processing equipmentThe parameter table:

product	QYM6515	QYM7815	QYM 8314	QYM 9517	QYM 130	QYM 160
Number of grinding rollers (pieces)	3	3	3	4	5	6
Grinding roller diameter x height (mm)	Φ260×150	Φ270×150	Φ270×140	Φ310×170	Φ420×220	Φ440×280
Grinding ring diameter x height (mm)	Φ650×150	Φ780×150	Φ830×140	Φ950×170	Φ1300×220	Φ1600×280
Maximum feed particle size (mm)	20	20	20	25	30	30
Finished product particle size (mm)	0.613-0.045	0.613-0.045	0.613-0.045	0.613-0.045	0.613-0.045	0.613-0.045
Output (t/h)	0.3-2	0.5-3	1.2-4.6	2.1-8	5-11	8-22
Dimensions (mm)	4100×3200×4800	4300×3500×5100	5300×4100×5200	7100×5900×7900	9200×7250×9700	12550×5750×8355