The remote control float valve (100X type) consists of a main valve, needle valve, ball valve, float valve, and micro filter. Including valve body, plug, valve seat, O-ring seal, O-ring pressure plate, O-ring seal, valve stem, valve disc, diaphragm, diaphragm pressure plate, nut, spring, valve cover, guide sleeve, nut, stud, ball valve, float ball valve, ball valve, needle valve, micro filter. Its working principle is that when water is supplied from the inlet end of the valve through the pipeline, the needle valve, ball valve, and float valve are normally open. Therefore, the water enters the valve cover control room through the micro filter and needle valve, and then flows into the water tank through the ball valve and float valve. If pressure cannot be formed in the control room, the inlet pressure under the main valve disc will lift the main valve disc and open it to supply a large amount of water into the water tank. When the water level in the water tank gradually rises and the float valve is lifted, the water in the valve cover control room will gradually increase pressure until the main valve disc is closed. At this time, it plays the role of automatic remote control.

The remote control float valve (100X type) is a hydraulic operated valve that combines multiple functions. Mainly installed at the inlet of water tanks or elevated water towers. When the water level reaches the set height, the main valve is controlled by the float ball guide valve to close the inlet and stop supplying water. When the water level drops, the main valve is controlled by the float ball switch to open the inlet and inject water into the pool, achieving automatic replenishment. The valve has accurate liquid level control, is not affected by water pressure interference, and can be installed at any position according to the height and usage space of the water tank. It is easy to maintain, debug, and inspect, has reliable sealing, and has a long service life.

Composition and application of remote control float ball valve (100X type):

1. The remote control floating ball valve consists of a main valve, needle valve, ball valve, floating ball valve, micro filter, etc. It is a hydraulic control connecting system that automatically controls the liquid level height after setting.

2. Remote control float valve directly utilizes liquid level control, without the need for other devices or energy sources, easy maintenance, high accuracy of liquid level control, not affected by water pressure, and reliable sealing.

Performance characteristics of remote control float ball valve (100X type):

1. The structure is novel and reasonable, and the hydraulic principle control theory is applied reasonably.

2. Stable and reliable work, with high traffic volume.

3. Fast opening and slow closing of valve disc, no water hammer impact (adjustable closing time).

4. Good check sealing effect and long service life.

5. Easy installation and maintenance.

Technical parameters of remote control float ball valve (100X type):

Nominal caliber: 40-600mm

Nominal pressure: 1.0, 1.6, 2.5 Mpa

Applicable temperature: 0-80 ℃

Applicable medium: water, non corrosive liquid

Main materials: gray cast iron, ductile iron