Electronic products have become a household name, and water quality is extremely important in electronic production. In response to this, Literide Company specializes in producing a set of reverse osmosis equipment for electronic product production in the electronics industry. The equipment is mainly made of a special artificial semi permeable membrane polymer material that simulates biological semi permeable membranes. It has the advantages of good effluent quality and stable operation. The reverse osmosis equipment used in electronic product production adopts a fully automatic control system, which can be easily operated.

Laitelide Company is a high-tech enterprise specializing in the development, production, and sales of high-quality water treatment equipment and other purification equipment. The company's main products include:water treatment equipmentWe have a skilled engineering installation team for ultra pure water equipment, purified water equipment, and purified water equipment. With scientific management, rigorous work, and strong technical and economic strength, we are dedicated to providing services to our customers.

　　Characteristics of reverse osmosis equipment for electronic product manufacturing

1. Extremely low energy consumption, saving the cost of concentration process.

2. The process has no chemical reactions, no phase changes, and does not introduce other impurities or cause product decomposition and denaturation.

3. At room temperature, it achieves the purpose of concentration and purification without causing damage to the active ingredients, and the process yield is high.

4. It can completely remove salt from the product, reduce ash content, and improve product purity.

5. Recyclable substances such as acids, bases, alcohols, etc. in the solution.

6. The device has a simple and compact structure, and occupies a small area.

7. Easy to operate, capable of achieving automated tasks, with good stability and convenient maintenance.

　　Requirements for inlet water quality of reverse osmosis equipment used in electronic product manufacturing

1. Water inflow up to SDI (15 minutes)<5

2. Inlet water with high turbidity<1.0NTU

3. Inlet high free chlorine concentration<0.1ppm

4. Inlet high temperature<45 ℃

5. Inlet water with high Fe content<0.05ppm

　　Methods for reducing membrane fouling in reverse osmosis equipment used in electronic product manufacturing

1. Firstly, it is necessary to do a good job in the pre-treatment of raw water, especially paying attention to the qualified rate of pollution index. At the same time, sterilization operations should be carried out to prevent the effective growth of microorganisms in the reactor, and attention should be paid to the damage of chloride ions to the membrane at all times.

2. During the operation of the equipment, it is important to maintain an appropriate level of operating pressure. In general, increasing the pressure will increase the water production, but if it is too high, it will cause the membrane to become compacted.

3. During equipment operation, turbulent flow on the saltwater side should be maintained to reduce concentration polarization of the membrane surface solution and avoid the precipitation of certain insoluble salts on the membrane surface.

4. When the equipment is shut down, chemical flushing should be carried out in the short term, and formaldehyde should be added for long-term protection measures.

5. When the water production of the equipment significantly decreases, it indicates membrane fouling or contamination, and chemical cleaning should be carried out.

6. Regularly analyze the quality of raw water and adjust the dosage of scale inhibitors according to the dosing plan provided by the technical support department based on the water quality.

7. Strictly prevent the phenomenon of running, emitting, dripping, and leaking of the dosing equipment, and add the medicine into the reverse osmosis inlet to effectively prevent scaling.

8. Suggest changing the flushing method of the reverse osmosis equipment after shutdown to using desalinated water for flushing.

9. When there is a problem with the reverse osmosis equipment used in the production of electronic products, the machine should be stopped immediately for processing to avoid the continuous expansion of the accident.