Usage description:

1. This machine is an automatic rotating continuous tablet pressing machine, which is the basic equipment for processing various granular raw materials into tablets in the pharmaceutical, chemical, food and other industrial sectors.

2. It is suitable for mass production of various round tablets, sugar tablets, calcium tablets, etc.

3. It is not suitable for pressing semi-solid, moist powders and extremely fine powders without particles.

Structural features:

1. The upper part of this machine is a tablet pressing structure, which mainly consists of an upper punch, a middle die, and a lower punch. The three parts are connected into one, and 33 sets of punching dies are evenly arranged around the edge of the turntable. The tail of the up and down punch rod is embedded in a fixed curved rail guide. When the turntable rotates, the up and down punch moves up and down along with the curved rail guide to achieve the purpose of pressing.

2. The main work process is divided into: (1) filling; (2) Pressurization; (3) Release a film; The three programs are carried out continuously, with adjustable control mechanisms for filling and pressurization, accompanied by nameplates for easy operation.

3. The distribution of the structure is double pressure, with two sets of symmetrical pressure wheels installed on both sides, so each rotation can continuously produce pieces.

4. The mold holes of the turntable are 33, arranged in a single pattern. Its advantage is that during operation, the left and right pressure wheels are not compressed at the same time, which greatly reduces the vibration and power consumption of the machine.

5. The electric motor is installed inside the machine base, and a triangular belt is used to drive the worm to rotate the turntable. A continuously variable speed pulley is installed on the motor shaft, and the speed can be adjusted arbitrarily through the movement of the motor slide plate. Safe, reliable, and noise free use.

6. The side of the machine base is equipped with a powder suction box, which includes a blower, a powder storage chamber, and a powder filter chamber. When the machine is running at high speed, it produces flying powder and powder that falls from the middle mold, which is discharged through the powder suction nozzle to prevent sticking and blockage, and to maintain smooth and normal operation.

instructions:

1. Before use, it is necessary to double check the quality of the punching die, whether there are missing edges, cracks, deformations, and whether the tightness does not meet the requirements, and whether the device is complete and good before working.

2. Check whether the powder of the granular raw material is dry and the powder content in the particles should not exceed 10%. If it is unqualified, do not use it hard, otherwise it will affect the normal operation and service life of the machine and the loss of raw materials.

3. The indicator pin for pressure regulation control should be placed on the first test drive“0On the position, pour the powder into the bucket, rotate the test wheel by hand, and adjust the filling and pressure gradually until the weight and hardness of the tablets meet the requirements of the finished product. Then turn on the electric motor first, and then turn on the clutch to start formal production. During the production process, the quality of the tablets must be checked regularly to see if they meet the requirements, and adjustments should be made if necessary.

4. The choice of speed has a direct impact on the service life of the machine. Due to the nature, viscosity, sheet size, and pressure of the raw materials, which cannot be uniformly regulated in use, the structure of this machine can be divided into two types: fast and slow. The slow speed uses the Yangtze River Delta to drive the outer rope wheel, which is suitable for pressing minerals, plant grass, and other materials that are difficult to form quickly. The fast speed uses a short triangle to drive the inner rope wheel, which is suitable for pressing, bonding, lubricating, and easy to form materials. Therefore, the user must choose according to the actual situation.

5. The manager must be familiar with the technical performance, internal structure, and operating principles of the control mechanism of the machine, and must not leave the workplace during operation to prevent damage to the machine due to malfunctions and ensure safe production as a prerequisite.

6. During use, always pay attention to whether the machine noise is normal. If there is a sharp sound, stop the machine immediately for inspection and elimination. Do not use it forcefully.