After years of development, the company can produce various series of crushing equipment with a wide range of uses, such as white carbon black precision processing equipment, carbon black precision processing equipment, and so on.

Product description of carbon black crushing equipment: After the material is added from the top of the upper box, it is quickly dispersed by the pre crushing blades on the upper part of the rotor, scattered towards the four walls of the stator, and enters the crushing zone composed of the rotor and stator. The large amount of air flow generated by the ultra high speed rotation of the rotor is influenced by both the rotating and stationary components inside the machine, as well as the proper guidance of the fan, and is transformed into countless rapid turbulent flows. These numerous air turbulence in the crushing zone drive the material and accelerate it to the same high speed as the airflow. However, the direction and speed of these materials suddenly change in an instant, which is also the principle of this crusher. The particles of each material collide with each other and complete ideal cracking in high-speed airflow. Only a small portion of particles are refined through the impact of internal motion and stationary components. During the entire residence period of material particles in the ZWV cyclone mill, they are always surrounded by air flow. Therefore, the heat inevitably generated during the ultrafine grinding process is also carried away by the air flow as the grinding medium. The high flow of air and its rapid turbulence ensure a small temperature rise.

The above high-speed crushing principle makes the ZWV cyclone mill without screening device particularly suitable for providing technically safe and economically beneficial solutions for grinding and drying operations. To achieve the desired fineness and yield, the height of the gap gasket can be increased or decreased to change the gap between the rotor and stator, thereby controlling its yield and fineness.

Product Description: The internal cavity of the body is cylindrical, divided into upper and lower parts by a ring. The lower part is the intake chamber, and the upper part is divided into a crushing chamber and a grading chamber by a diversion ring. The crushing chamber is composed of a crushing disc and a liner, used to crush materials into fine powder. The grading chamber is composed of grading impellers, which can divide fine powder into two specifications: standard particle size and non standard particle size. Standard particles are sucked out through the discharge pipe and collected by the cyclone collector. Unqualified products fall back to the crushing chamber along the inner wall of the diversion ring and continue to be crushed until they meet the standard.

The speed of the graded impeller can be adjusted to regulate the particle size of the product. The feeding screw device is located on the inner wall of the machine body and is used to feed materials into the crushing chamber. Its speed can also be adjusted to control different feeding amounts.