Product Features

• Measure and output voltage, current, resistance, frequency, thermocouple, and thermistor signals simultaneously, and isolate the measurement and output from each other.
• The button controls the output function of any step, making it easier to check linearity and saving time compared to traditional knob style.
• Provide a 24V power supply for the transmitter, allowing for direct measurement of current in the circuit, making it easier to detect two-wire transmitters; It also has the function of simulating transmitter output. Output current loop fault diagnosis, loop fault indication and alarm.
• Eight types of thermocouples and four types of thermal resistors have ITS-90 standard calibration table corresponding displays. Built in or external temperature sensors provide cold end temperature compensation for thermocouples, or manual cold end temperature compensation function can be selected.
• Equipped with a thermal electronic dictionary function, it can achieve mutual query between temperature and thermoelectric potential or resistance.
• High precision is guaranteed over a wide temperature range, with a six digit display. Large screen LCD with backlight, Chinese intelligent menu, more comprehensive parameter display, and easier to use.
• Using panel calibration technology, there is no need to open the instrument case, making it easier to trace the instrument to the previous level standard.
• Unique battery capacity icon display and power saving management, longer usage time, automatic shutdown under low power.
• Optional real-time clock, data recording, and RS-232 interface communication functions.

Accessories

1. Two sets of probes, each with two colors: red and black, where red is positive and black is negative.
2. A set of frequency lines. The color of the output and measurement lines is different. The line near the "OUT" mark is the output line, and the line near the "IN" mark is the measurement line. The red clip is positive, and the black clip is negative. The measurement and output ports are located in the "Frequency" hole on the rear panel.
3. One power cord.
4. One cold repair wire (Pt1000) can be inserted into the "COLOR JUNCTION" port on the rear panel to achieve the measurement function of ambient temperature.