|
| |
| Durable ruler body: |
1. |
Scale shell: TA16 anodized aluminum extrusion, integrated molding |
|
| |
2. |
Side cover: used to fix the two sides of the ruler |
| Anti fouling design: |
3. |
Ruler head group: consisting of a ruler head base (T) and a signal detector (P), |
| |
|
Steel plates and washers form waterproof protection for circuits |
| |
4. |
Outer dust-proof rubber: ElastoAmerican 70 rubber is used, which is elastic, |
| |
|
Can quickly seal and prevent pollutants from entering |
| |
5. |
Inner protective rubber: an additional layer of protection to isolate small pollutants |
| |
6. |
Rubber gasket: protects the ruler body and prevents oil and water from entering from both ends |
| Accurate measurement: |
7. |
Elastic coupling: compensating for installation errors, correctly sensing engraved lines, and self correcting mechanical hysteresis |
| |
8. |
Circuit board: Laser corrected A and B phases, fixed resistance signal, high stability |
| Steel strip engraving: |
9. |
Stainless steel engraving line: modular design of single piece steel strip (integrated molding) |
| |
10. |
Steel strip fixation: fixed in the ruler shell from both sides |
| |
11. |
Self adjustment compensation: The spring module can automatically adjust the distance difference between the steel strips from both ends,
Including installation errors within the allowable range and thermal expansion variations of the mechanism,
The expansion coefficient of the steel tape ruler is 10.6 × 10-6 ℃ -1 (the thermal expansion coefficient of the steel tape ruler is very close to that of the workpiece and machinery)
|
| The signal line: |
12. |
Signal line: woven from stainless steel wire, can protect the signal line, with a length of up to 50-60M or more |
| |
|
No additional wiring is required (tubular protective wire or ultra flexible wire can also be selected) |
| monitor: |
13. |
|
| |
|
Absolute/incremental value switching Split (1/2) Function preset size in metric/imperial system Switch the angle of the last set of memory power-saving devices Split and save work items 200 point reference point memory
|
|
|
|
| |
Encoding SCR |
W10 |
100 |
K5 |
5 |
W1 |
origin |
Standard/Customer Requirements |
cod.Z |
trip |
standard |
module |
mm |
cod. 0350...6500 |
cod. 6650... |
Grating pitch P μ m |
400 |
40 |
40 |
20 |
40 |
Resolution μ m |
10
ID-10 |
10 |
5
ID-2 |
5 |
1
ID-10
|
Accuracy μ m/m |
±5 |
±5 |
±5 |
±3 |
±3 |
Thermal expansion coefficient |
10.6 x 10-6℃-1 trif.=20℃±0.1℃ |
Speed m/min |
120 |
80 |
80 |
60 |
25 |
acceleration |
40 m/s2 |
30m/s2 |
25m/s2 |
Maximum feed resistance |
Between 2.5 and 4N |
Seismic resistance |
0 ~ 2000Hz 100m/s2 |
Impact resistance |
11ms <= 150m/s2 |
protection grade |
IP54 (optional), IP64DIN 40050/IEC 529 |
temperature |
operation temperature |
0℃-50℃ |
storage temperature |
-20℃-70℃ |
humidity |
relative humidity |
20%-80% |
bearing |
5 Bearing System |
Internal connector of ruler head |
--- |
have |
--- |
have |
--- |
weight |
600g + 1350g/m |
|
| |
|
| Order Information |
| |
|
| |
Grating ruler |
S |
□ Z |
□ |
5 |
□ |
□ |
□ |
□ |
□ |
model |
accuracy
|
Travel distance (mm) |
voltage |
signal |
Line length (M) |
joint |
line table |
Origin Mark |
SCR3923 |
100: 10μm
W1:1μm
|
0250,0300,0350, 0400,0450,0500, 0600,0700 |
5:5V |
Q: Single square wave
|
0250~0700
Standard 4M |
C: C54
(9-core connector) |
P:
Ultra soft wire
|
C: Intermediate origin
R: Right origin point
L: Left origin point
M: Multiple origin points |
0750, 0850, 0900, 1050, 1200, 1400, 1550, 1650, 1800, 2050, above 2050
|
L: Both sides wave |
0750~2050
Standard 6M
|
S: SC (without connector) |
R:
cross hatch
|
|
| |
monitor |
MT20 |
□ |
. |
number of axles |
2: Two axis display
3: Three-axis display |
|
|
