VIP member
SDC-H Online Water Hardness Monitor without Chemical Addition
SDC-H Online Water Hardness Monitor without Chemical Addition
Product details
SDC-H Online Water Hardness Monitor without Chemical Addition
model:SDC-H
characteristic:
Unlike traditional water hardness monitors,SDC-HCalcium and magnesium ion selective sensors based on potential measurement were used.
Product performance:
The limit values to be monitored can be0.9ppmto18ppmSet in stages within the range of water hardness.
Users can also choose measurement unitsmmol / l， °fperhapsppm.Measurement values and equipment status information can be stored in an integrated systemUSB
Up there.
Users can choose between German and English during use.SDC-H
There are different measurement modes, so it can flexibly adapt to various measurement tasks.
environment protection
The operation process is green and environmentally friendly, with strong practicality because no other reagents or indicators are required.Ensure this
The self-monitoring and measurement functions of sensor loops contribute to the smooth operation of the entire process.
Easy installation:
Softening controller
The installation, debugging, and operation are extremely simple. Simply insert the sensor into the measurement room to complete the replacement of the sensor.
compatibility:
Can be used for any water softener with sodium chloride regeneration properties. Installation can be carried out continuously based on existing devices.Clear display screen:LEDThe display screen can clearly show the device status and water hardness value. Parameterization can be done through four buttons. The monitoring value of hardness will be displayed on the screen and can be measured in units such as degreesdH，mmol/l，ppmOr °
f
Parameterize.
Easy to use:
|
Almost no maintenance is required, except for occasional sensor replacement. |
Device data:Volume400 x 250 x 160 mm (widextallx |
|
deep |
)Weight |
|
make an appointment |
8 kg |
|
protection grade |
5 IP 54ambient temperature° 50 Cto |
|
° |
Crelative humidity20 %to 100 80 %Plug in power supply… 60 240 V / 50 |
|
… |
hertzworking voltage 20 15 V DC |
|
make an appointmenttileraw water |
/Soft water connectionBranches can be connectedPAOuter diameter of hose4 mmInner diameter2 mm |
|
Particles ≤0.1 mmraw water |
/ 1 Soft water pressure minimum 10 Pa |
|
maximum |
Pa,Drainageminimum |
|
Ø 15 mm |
No pressure restrictionsHigh quality raw water or soft water |
|
According to relevant drinking water regulations, free of fat, oil and salt water, and bacterial count<5000 cfu/ml |
Range of water hardnessraw water18 ppmto700 ppm ( |
|
Can correspond to unitsmmol/l) |
Range of water hardnesssoft water0.2 ppmto18 ppm ( |
|
Can correspond to units |
mmol/l)Limit value setting0.9 ppmto18 ppm ( |
|
Can correspond to units |
mmol/l) |
|
sensor control |
automation |
|
Signaling |
Exceeding the limit value, replace the sensor |
|
Other auxiliary signals |
No potential information exchange6 Sensor lifespan 9 make an appointmentarriveMonth |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-