VIP member
Product details
[Technical Parameters]:
| model | YK-100 | YK-160 | YK-250 |
| Production capacity (kg/h) | 20-100 | 80-200 | 150-400 |
| Motor power (kw) | 1.1 | 2.2 | 5.5 |
| Drum speed (r/min) | 55 | 55 | 40 |
| Swing angle | 360° | 360° | 360° |
| Drum diameter (mm) | Ф120(mm) | Ф160(mm) | Ф250(mm) |
| Dimensions (L × W × H) | 700×400×1050(mm) | 1000×800×1300(mm) | 1300×920×1500(mm) |
[Main purpose]:
The swing pellet machine is suitable for industries such as pharmaceuticals, food, and chemicals to develop wet powders into desired pellets, and can also crush block shaped dry materials into desired pellets. It uses mechanical transmission to make the drum oscillate back and forth, extruding materials from the sieve into particles. By replacing the sieve with different mesh sizes, particles of different thicknesses can be made. The sieve and drum are easy to assemble and disassemble, and the entire machine's periphery and contact with materials are made of stainless steel material, which is easier to clean and maintain. It is suitable for small-scale production in pharmaceutical, chemical, food, scientific research units, laboratories, hospitals, and small health product factories. It is a necessary equipment for producing granular granules, tablets, or capsules. It can also be used as a pre grinding process for breaking and dispersing some fragile, loose, and brittle materials in the form of strips and irregular shapes.
[Working principle]:
By using mechanical transmission to oscillate the drum back and forth, the material is extruded from the sieve into particles or crushed into granules.
【 Precautions and Instructions 】:
1. Usage: Start the machine, pour the mixture into the hopper, and use the swinging effect of the rotating drum to squeeze the material through the sieve to form particles, such as crushed blocks, which should be gradually added. It is not advisable to fill them up to avoid excessive pressure and make the sieve vulnerable.
2. Attention: If the powder cannot be stopped in the powder hopper, do not use your hands to shovel it to avoid hand injury accidents. Use a bamboo shovel or park to work.
[Service Commitment]:
Design and production
Our company extensively solicits opinions from the demand side during the design and production stages of equipment processing, especially in the layout of flat and vertical surfaces, fully considering the site conditions and public engineering conditions of the demand side, so as to ensure the quality of the equipment while optimizing the combination.
Installation and commissioning
When the equipment arrives at the buyer's factory, our company will send dedicated technical personnel to guide the installation and be responsible for debugging to normal use.
training
Before the equipment is used normally by the demand side, our company's debugging personnel will organize training for relevant personnel of the demand side. The training content includes equipment maintenance, upkeep, timely repair of common faults, and operating procedures for the equipment.
quality assurance
Our company's equipment warranty period is one year. During the warranty period, if the equipment is damaged due to non-human factors, we are responsible for free maintenance. If the equipment is damaged due to human factors, our company will promptly repair it and charge a cost fee.
Maintenance and Deadline
Equipment damage that occurs upon expiration of the warranty period shall be repaired on site within two days by enterprises within the province and within four days by enterprises outside the province upon receiving notification from the purchaser. The services provided upon expiration of the warranty period are paid services, and a production fee shall be charged for each service.
Service Commitment
Our company promises to provide lifelong guidance, maintenance, and service for all equipment.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-