[Technical Parameters]:

[Main purpose]：
Mainly suitable for crushing and processing low to medium hardness materials such as ginger, chili, pepper, oil wheat, soybeans, white sugar, star anise, cinnamon, etc. in the pharmaceutical, chemical, and food industries. The fineness can be adjusted between 10-120 mesh, with high yield, fine particle size, low noise, and low energy consumption

It has the advantages of simple maintenance and easy installation, and is particularly suitable for crushing and processing low hardness materials such as oily, viscous, heat sensitive, and fibrous materials.

[Features]:
The crushing chamber adopts a wind turbine high-speed rotating knife, and the air volume inside the chamber is large, making it less prone to heating. It has the advantages of smooth operation, easy disassembly and cleaning, low noise, and good crushing effect.

【 Working Principle 】：
When the pulverizer rotates, the motor drives the spindle and cutterhead to rotate at high speed. The grinding blocks on the cutterhead and screen ring form a crushing and grinding pair. When the material enters the machine cavity from the feeding hopper, it tightly rubs and strongly impacts the inner side of the blades of the cutterhead in the rotating airflow of the cutterhead, and grinds again in the gap between the blades and the grinding blocks. At the same time as crushing materials, the cutterhead sucks in a large amount of air, which plays a role in cooling the machine, grinding materials, and conveying fine materials. The fineness of material crushing depends on the properties of the material and the size of the sieve, as well as the throughput of the material and air.
The bearing components of the crusher are equipped with specially designed labyrinth seals, which can effectively prevent dust from entering the bearing chamber, thereby extending the service life of the bearings. The machine door is equipped with silicone rubber sealing rings, which prevent dust leakage and pollution.

【 Crushed Material 】:

[Service Commitment]:
Design and production
Our company extensively solicits opinions from the demand side during the design and production stages of equipment processing, especially in the layout of flat and vertical surfaces, fully considering the site conditions and public engineering conditions of the demand side, so as to ensure the quality of the equipment while optimizing the combination.
Installation and commissioning
When the equipment arrives at the buyer's factory, our company will send dedicated technical personnel to guide the installation and be responsible for debugging to normal use.
training
Before the equipment is used normally by the demand side, our company's debugging personnel will organize training for relevant personnel of the demand side. The training content includes equipment maintenance, upkeep, timely repair of common faults, and operating procedures for the equipment.
quality assurance
Our company's equipment warranty period is one year. During the warranty period, if the equipment is damaged due to non-human factors, we are responsible for free maintenance. If the equipment is damaged due to human factors, our company will promptly repair it and charge a cost fee.
Maintenance and Deadline
Equipment damage that occurs upon expiration of the warranty period shall be repaired on site within two days by enterprises within the province and within four days by enterprises outside the province upon receiving notification from the purchaser. The services provided upon expiration of the warranty period are paid services, and a production fee shall be charged for each service.
Service Commitment
Our company promises to provide lifelong guidance, maintenance, and service for all equipment.

[Safety precautions for use]:
1. Before use, check whether all fasteners of the machine are tightened and whether the belt is tensioned.
2. The direction of spindle operation must conform to the arrow direction indicated on the protective cover, otherwise it will damage the machine and may cause personal injury.
3. Check if the electrical appliances are complete.
4. Check if there are any hard objects such as metal in the crushing room of the machine, otherwise it may damage the cutting tools and affect the operation of the machine.
5. Before crushing, the purity of the material must be checked, and no metal or hard impurities are allowed to mix in, in order to avoid damaging the cutting tool or causing accidents such as combustion.
6. The oil cup on the machine should be regularly filled with lubricating oil to ensure normal operation of the machine.
7. Stop adding materials before stopping the machine. If not in use, remove any remaining debris inside the machine.
8. Regularly check whether the cutting tools and mesh are damaged, and replace them immediately if they are damaged.
9. There may be slight vibrations during use, so be sure to tighten the handle connecting the hood to avoid accidents.