summary
SH type spherical series filler polymer is injection molded in one go Due to its selected material with a specific gravity of 0.91-0.97/gcm3, it can both suspend and move in water, and is in a fluidized state. It is currently recognized by environmental experts both domestically and internationally as an energy-saving and high-efficiency biological carrier. Mobile biofilms clearly have both quantitative and qualitative improvements in the three-phase mass transfer mechanism of gas-liquid membranes compared to fixed biofilms, and suspended mobile membrane carriers are the direction of development in the field of water treatment. This spherical packing can also be applied to various industrial towers such as chemical reaction towers, reaction tanks, and vulcanization towers.

Ordering Instructions
SH type spherical packing during installation Firstly, divide the pool into several units using a rope net inside the pool, and then tighten it with a rope net 50cm from the bottom of the pool to prevent the floating ball filling from drifting to one side or sinking to the bottom of the pool due to water and air flow.
When installing this filling material, only 10-70% of the floating balls need to be directly injected into the pool.
When this filler is discontinued, it should not be stored outdoors and should be soaked in water to avoid affecting its service life due to aging and brittleness.
When placing an order, it is necessary to specify the type of floating ball packing and the quantity (in pieces).