The SPT-CS water sampler is designed according to the Niskin type water sampler from abroad and is suitable for sampling at any depth in rivers, lakes, and oceans. Place the water sampler (with both ends of the cap open) into the water using a rope. After entering the water, the water will flow through the bottle. Once it sinks to the designated depth, slide down the rope and use the hammer to close the cap, sealing the water sample. Lift the water sampler out of the water surface to complete the sampling process.

Widely used in nuclear and radiation safety monitoring departments, environmental monitoring stations, disease control centers, occupational disease prevention and control institutes, entry-exit inspection and quarantine, nuclear industry research institutions, nuclear geology, nuclear power plants, nuclear science related research institutions, marine testing, third-party testing companies and other related fields.

Technical parameters:

1. Style: Two types: horizontal and vertical;

2. Material: UPVC;

3. Capacity: 3L, 5L, 8L, 10L

4. Water release time: 2-8 minutes;

5. Working water depth: 600m

6. Hammer: made of 304 stainless steel;

7. Series use: Can be used in series with a hanging hammer (multiple water collectors can be used in series through a middle bracket)

If a series of water collection work needs to be carried out on a cable, a hammer can be installed below each water collection bottle. When the end closer of the previous water collection device is closed, the hammer below it will be released, thereby triggering a series of sampling work along the cable.

9. Weight of a single water bottle: 4Kg