The SPT-SW unmanned collection ship for radioactivity detection of water samples is applicable to the collection of water samples from rivers, lakes and reservoirs. With the unmanned remote control ship as the carrier, water samples are collected through the suction pump and the water sample collection bag, which solves the limitation that the sampling personnel can only take water from the shore when sampling and the danger of sampling in the water area by boat. This product can remotely control the sampling vessel from the shore to reach the designated water area, and extract water samples by controlling the sampling pump, which not only standardizes the sampling standards but also simplifies the sampling process. Can be used for water sample collection in water conservancy bureaus, hydrological bureaus, radiation stations, nuclear power plants, nuclear industry, disease control centers, water companies, environmental monitoring stations, scientific research institutions, third-party testing companies, etc., in accordance with the "Technical Regulations for Design of Water Quality Sampling Plans" HJ 495-2009

Product Performance

1) Remote control of water sample collection. Remote control of water quality sampling vessel to reach designated water area,

Complete sampling and return

2) GPS positioning system, displaying latitude and longitude. Automatically save the starting point during sampling, and the sampling ship will automatically return to the starting point in case of signal loss or low battery

3) The remote control comes with a sampling ship and battery display function, and can set a low battery alarm value independently to remind the sampling ship to charge in a timely manner

4) The lighting indicator light has both lighting and positioning functions, making it easy to observe the sampling ship from a distance

5) Comes with pipeline cleaning function

6) Quick snap fastener for water sample collection bottle, allowing for quick and convenient collection and replacement of sampling bottles

7) The length of the sampling tube can be adjusted freely between 0-3m according to the depth of the sampling water area (if it exceeds 1 meter, please hang a line to travel to prevent the sampling head from getting stuck at the bottom and facilitate the recovery of the sampling ship)

8) The tail of the sampling vessel is equipped with a towing hook, which can be used to hang the line during sampling in complex water areas or rivers with high flow rates, facilitating the recovery of the sampling vessel

Technical Parameter

1. Product size: 710 * 450 * 300mm

2. Sampling distance: 0-500 meters (without signal interference)

3. Net weight of product: 9kg Sampling depth: 0-3m

4. Packaging size: 800 * 600 * 300mm Sampling flow rate: 2L/min

5. Product weight: 23kg

6. Collect water sample: 12L

7. Power supply: 12V-18AH

8. Sampling time: 6 hours

9. Maximum speed: 100m/min (unloaded)

10. Length of safety rope: 500m

11. Sampling point setting: 80

12. GPS positioning accuracy: 1 meter

13. Signal transmission: 5.8GHz

14. GPS signal response time:<80 seconds

15. Signal loss response time: 20 seconds

16. Number of satellite positioning:>5