Sampling vehicleAlso known as a clean sampling vehicle, the sampling vehicle is suitable for sampling raw and auxiliary materials of pharmaceutical preparations (excluding sterile preparations) The cleanliness level reaches 10000 level cleanliness.

1、 Zijing sampling vehicleIt is a vertical flow local air purification device that purifies indoor air from the moment it passes throughPrimary FilterFiltering, achieving a high cleanliness working environment through the exhaust of high-efficiency air filters.

The sampling vehicle is designed and manufactured according to GMP standards, with a cleanliness level of one hundred to ten thousand, suitable for use in dust-free environments, and commonly used for sampling raw materials of pharmaceutical preparations (excluding sterile preparations). The centrifugal fan and other main components used in this sampling vehicle comply with the requirements of GB1497-87 (Safety Standard for Electric Motors). The product structure is composed of stainless steel plates or spray coated steel plates.

2、 Usage method of "Zijing" clean sampling vehicleMove the sampling vehicle to the location where it needs to be sampled, fix the sampling vehicle, turn on the power, turn on the power and fan switch, the fan starts working, adjust the voltage (usually 220V), wait for the sampling vehicle to run for 15 minutes, and then put it into the sampling bucket. After the sampling is completed, turn off the fan and power, and move the sampling vehicle to its original location.

3、 Attention:According to usage, it is necessary to regularly measure the wind speed in the work area with an anemometer. If it does not meet the relevant technical requirements, the fan volume can be adjusted, and if necessary, high-efficiency or primary air filters can be replaced.

4、 Configuration of the "Zijing" sampling vehicle:
1. Equipped with one aluminum frame non partition high-efficiency filter, the filtration efficiency is: 99.99@0.3 μ m and 1 unitG4 level primary filterEnsure purification level, static 100 level US Federal 209E standard;
2. The two sides of the work area are stainless steel baffles, and the front and rear are strip-shaped anti-static and dust-proof curtains, achieving the ideal dust-proof effect;

3. Equipped with a large air volume and low-noise imported fan of 0.165KW, ensuring a wind speed greater than 0.45m/s;

4. Equipped with a pressure differential gauge imported from the United States, it clearly indicates the pressure difference on both sides of the high-efficiency filter and promptly reminds you to replace the high-efficiency filter;

5. Adjustable speed fan design, stable speed regulation performance, inHigh efficiency filterUnder the condition of final resistance, the airflow can still remain unchanged;

6. Equipped with adjustable feet and universal wheels, it is easy to move and move, and the positioning is stable and safe;

7. Stainless steel inner bottom orifice plate, easy to place and remove.

Requirements for after-sales service time of purification equipment:
Whether it is paid after-sales service or free after-sales service, customers provide feedback on equipment after-sales issues to Zijing. After our company provides a solution and the customer confirms the solution:
1. Arrive at the site within 24 hours within the Pearl River Delta and Yangtze River Delta to solve after-sales service problems;
2. In other areas, it is generally within 48 hours to arrive on-site to solve after-sales service problems, while in special remote areas, it is up to 96 hours to arrive on-site to solve after-sales service problems.
Original source: Guangzhou Zijing http://www.zj-filter.com/ Li Gong (139-2875-8616)