Product details introduction
Nominal diameter DN15 to DN150 · NPS1/2 to NPS6“
Nominal pressure 10 bargTemperature -10 ℃ to 160 ℃·
1. 3345 diaphragm valve is equipped with:
#3271 type pneumatic actuator (3345-1 type control valve)
#3277 type pneumatic actuator with integrated installation of valve positioner (3345-7 type control valve)
Valve body manufacturing material:
#Cast stainless steel
By using different lining materials, valves can be used for various types of process media.
2. Type
Standard Type 3345 Diaphragm Valve, DN15 to DN150 (NPS1/2 "to NPS 6"),
Maximum pressure of 10 barg (150 PSIG), cast iron valve body, synthetic rubber diaphragm (butyl 300) applicable temperature range
From -10 to 130 ℃, the flange follows DIN standards
#3345-1 type · Diaphragm valve configuration 3271 type pneumatic actuator
#3345-7 type · Diaphragm valve configuration 3277 type pneumatic actuator
3. Additional types:
#Valve flanges shall comply with ANSI or BS standards
#The valve body of the valve type in the food processing industry is cast stainless steel:
Welding end faces are used for pipelines that comply with DIN 11850 series 2, DN15 to DN150, DIN EN ISO 1127·
ISO 2037 · BS 4825 · ASTM A270(O.D.)· SMS 3008
Fixture according to DIN 32676, ISO 2852, BS 4825
Threaded connection according to DIN 11887 · ISO 2853 (IDF) · SMS1146 · DIN 11864-1 Type A
4. Aseptic flange according to DIN 11846-2 type A
#Configure 3274 type electro-hydraulic actuator
#Other membrane materials available upon request
#Nominal diameter DN8 and DN10, provided as required
#Configure piston actuator · Provide as needed
#Valve nominal pressure PN16, nominal diameter DN15 to DN150, synthetic rubber diaphragm provided upon request
5. Fault - Safe Location
When the gas source fails, there can be two different control valvesFault safe location.
#When the pneumatic actuator push rod extends (FA), the control valve closes when the air source fails.
#When the pneumatic actuator push rod retracts (FE) and the air source fails, the control valve opens.

