Product details introduction

application

Single acting or double acting(Need to be equipped3710inverting amplifier)Valve positioners are used for assembly onto pneumatic control valves,Self calibration, automatic adaptation of control valves and pneumatic actuators. input control signal4-20 mA,trip3.75-200mm,Opening angle24°to100°

characteristic

• Can be directly assembled onto the beltSamsonDirect or angular stroke pneumatic execution with integrated connection portEquipment
AssemblyIn accordance withIEC 60534-6-1(NAMUR）Casting support for standard control valvesframe
NAMUROn the flangeOr on pole shaped brackets, as well as assembled in accordance withVDI/VDE 3845treetopAccurate angle
Travel pneumatic actuator

• Any installation location

A simple rotary button for menu calling operations

• Easy to read, can choose to change according to the reading direction needsLCDDisplay direction

• Variable, automatic start

• Pre set parameters-Just adjust the deviation value from the standard

The calibrated travel sensor is not affected by the wear of the mechanical transmission mechanism

All parameters are stored in non-volatile storage for a long timeEEPROMstorage(Power failure protection)

Two wire system with minimum electrical load300Ω

Activate the emergency shutdown function

• Zero point continuous monitoring

Two standard configurable valve position alarms

• ClassicIEC 61508/SILverification