The sawdust pellet machine mainly produces sawdust (also known as sawdust, wood bran, wood powder, so it can also be called wood bran pellet machine or wood powder pellet machine) from sawdust processing plants or furniture factories as the main raw material. The fuel pellets produced are used to replace coal and gas, and are widely used in biomass power plants, biomass pellet burners, chemical plants, etc.

Production process of sawdust particles:

Raw materials - drying - granulation - cooling - dust removal - packaging

Working principle of sawdust pellet machine:

After pre-treatment, the material enters the granulator (through the action of centrifugal force, the material continuously moves in a circular motion and adheres to the inner wall surface of the press mold, forming a uniform annular material layer, and the material is continuously rotated and squeezed by the press roller to forcefully enter the ring mold hole for molding, and continuously extruded outward). Through the continuous rotation and compression of the press roller and pressure plate, the material enters the mold hole with rotation, and after some time of pressure holding, the particles that reach density and strength are extruded outside the film hole, and cut into the required length by the cutter and pushed to the discharge port.

Purpose:

Rice husks, sunflower seed shells, peanut shells, and other types of melon and fruit shells; Various sawdust scraps such as branches, trunks, bark, etc; Various crop straw; Rubber, cement, ash and other chemical raw materials. Applied to feed mills, sawdust processing plants, fuel plants, fertilizer plants, chemical plants, etc., it is an ideal compression densification equipment with small investment, fast results, and no risk.

Characteristics of sawdust pellet machine:

1. The formed granular fuel has a high specific gravity, small volume, and is resistant to combustion.

2. The formed granular fuel is a new type of bioenergy that is energy-saving, environmentally friendly, and pollution-free.

3. Patent mold, adjustable particle diameter size.

4. The granulation speed is fast, solving the problem of difficult granulation of cotton straw fibers.

5. The pressure wheel can be automatically adjusted to avoid squeezing and stuffiness.

6. The finished granules have good quality and are easy to transport and store.

7. The formation rate of particulate fuel is above 99.5%.