Product Introduction:

For the pulverization of oily materials (such as sesame, peanut, almond, etc.), if other pulverizers are used for pulverization, the materials will produce oil, blockage, etc., and cannot be crushed normally. However, using three sets of roller crushers, the fineness of the finished product can only reach40Left and right eyes, to achieve60The fineness of the product needs to be repeatedly crushed twice or more, which will reduce production, increase employee labor intensity, and cause finished product pollution.

Product features:

This machine has the advantages of easy operation and maintenance, smooth operation, low noise, low energy consumption, high output, no pollution, and reduced labor intensity for operators. It is a device for crushing oily materials.

Technical parameters:

Specifications: ZMF-3

Motor Power: 7.5KW

Roller speed:

Upper pressure roller:

driving wheel: 38r/minPassive Wheel: 19r/min

Lower pressure roller:

driving wheel: 45r/minPassive Wheel: 23r/min

throughput:100-500Kg/h

Roller diameter:φ180mm

Roller length:200mm

working principle:

The material to be crushed enters the roller pressing area from the feeding hopper and is crushed by squeezing between three sets of rollers. A set of pressure rollers is used for coarse crushing, which roughly crushes larger particles with regular shapes into smaller particles with irregular shapes; The second set of pressure rollers is the medium crushing pressure roller, which crushes the irregularly shaped smaller particles crushed by the first set of pressure rollers into fine particles; Three sets of pressure rollers are used for fine crushing, and the fine particles crushed by the two sets of pressure rollers are further crushed into particle size60Finished products on both sides of the eye. The finished product is discharged and collected from the discharge hopper. The grinding fineness with different requirements can be obtained by adjusting the spacing between the two rollers with a handwheel.

The machine consists of a feeding hopper, a set of pressure rollers, two sets of pressure rollers, three sets of pressure rollers, a pressure roller cleaning scraper, a discharge hopper, an electric motor, a cycloidal pinwheel reducer, a frame, a transmission gear, an adjusting handwheel, a transmission sprocket, and other components.