Sharp tipped microsampler (gas consumables)

Do not wash with heavy alkaline solution to prevent glass from losing weight due to corrosion and stainless steel parts from being affected by corrosion, which may cause water and gas leakage.

This injector has a liquid storage injector, so when sucking the solution, the tip tube should be immersed in the solution and pulled back and forth several times to remove any bubbles inside the needle tip (all bubbles must be removed before use). Users must be careful, otherwise it will affect the accuracy of analysis and capacity.

Sharp tipped microsampler (gas consumables)It is fixed and cannot be removed. The inner hole of the needle tip is extremely small, so it is not suitable to suck solutions with coarse suspended substances. After use, it should be cleaned immediately to prevent needle tip blockage.

If the needle tip is blocked, it is advisable to patiently connect it with a 0.1mm stainless steel wire and not directly burn it with fire to prevent the needle tip from losing its piercing ability due to high heat during annealing.

This sampler must not be in the core When the humidity between the sleeves is insufficient (before it dries), pull the core back and forth multiple times to avoid getting stuck and causing damage due to wear and tear.

If discoveredWhen stainless steel oxide (blackening phenomenon) affects normal use, dip a small amount of soapy water on the stainless steel core and insert it into the sampler. Come back a few times to remove it, and then clean it again.

10ulMicro injector Chromatographic injection needle

Micro injector10UL chromatographic injection needleAvailable for scientific researchChemical industry, oil refining Hospitals and other institutions are used for analysis. Specially suitable for gas chromatography analysis, it is a precision instrument.To extend the service life of the sampler, please remember the following precautions.

lDo not wash with heavy alkaline solution to prevent glass from losing weight due to corrosion and stainless steel parts from being affected by corrosion, which may cause water and gas leakage.

lThis injector has a liquid storage injector, so when sucking the solution, the tip tube should be immersed in the solution and pulled back and forth several times to remove any bubbles inside the needle tip (all bubbles must be removed before use). Users must be careful, otherwise it will affect the accuracy of analysis and capacity.

lThe needle tip of the sampler is fixed and cannot be removed. The inner hole of the needle tip is extremely small, so it is not suitable to suck solutions with coarse suspended substances. After use, it should be cleaned immediately to prevent needle tip blockage.

lIf the needle tip is blocked, it is advisable to useThe stainless steel wire with a diameter of 0.1mm should be patiently connected and not directly burned with fire to prevent the needle tip from losing its piercing ability due to high heat during annealing.

lThis sampler must not be in the coreWhen the humidity between the sleeves is insufficient (before it dries), pull the core back and forth multiple times to avoid getting stuck and causing damage due to wear and tear.

lIf stainless steel oxide (blackening phenomenon) is found in the sampler that affects normal use, dip a small amount of soapy water on the stainless steel core and insert it into the sampler. Come back and forth a few times to remove it, and then clean it again.

Shanghai Xuansheng Science mainly producesThe products include gas chromatography, liquid chromatography, gas generator, moisture analyzer, headspace sampler, thermal analyzer, flash sampler, pure water (ultrapure water) generator, chromatographic packed column, column temperature box, solvent filter, nitrogen blower, solid-phase extraction device, small ultrasonic wave, chromatographic accessories consumables and other laboratory analytical instruments.

Shanghai Xuansheng Science's main products include gas chromatography, liquid chromatography, gas generator, moisture analyzer, headspace sampler, thermal analyzer, flash sampler, pure water (ultrapure water) generator, chromatographic packed column, column temperature box, solvent filter, nitrogen blower, solid phase extraction device, small ultrasonic, chromatographic accessoriesWaiting for laboratory analytical instruments.