Shenjiang gas storage tank:

A gas storage tank refers to a device specifically designed to store gas. Gas storage tanks are commonly used for storing and transporting gases. According to the different bearing pressures of gas storage tanks, they can be divided into high-pressure gas storage tanks, low-pressure gas storage tanks, and atmospheric pressure gas storage tanks; According to the different metal materials used in gas storage tanks, they can be divided into stainless steel gas storage tanks, carbon steel stainless steel gas storage tanks, and alloy material stainless steel gas storage tanks.After installing an air compressor in the air storage tank, it can not only store compressed air, reduce pressure pulsation caused by discontinuous discharge of the compressor, achieve a balance between gas supply and consumption, but also lower the temperature of the compressed air and reduce the load on the filter and desiccant. The shell material of the gas storage tank: The gas storage tank belongs to pressure vessels, and the commonly used materials for the shell are Q235-B and 16MnDR. According to GB150 "Steel Pressure Vessels", different materials have different usage states and temperature ranges (as shown in the table):

Parameters and models of air compressor storage tank:

Precautions for installation of air compressor storage tankThe height of the gas source room is about 2.9 meters. Considering the frequent movement and transportation of the gas source, sufficient rigidity and strength need to be maintained. The base height is generally 300mm, and the roof is made into a slope, resulting in a net height of 2 meters inside the gas source room. All equipment cannot be installed without this height. At 2.5m³ Taking the gas storage tank as an example, it is designed and manufactured according to JB/T8867, with a nominal diameter of DN1200mm; In order to reduce the height, the nominal diameter of the gas storage tank in the gas source room is DN1500mm, and the safety valve is installed on the side of the gas storage tank, with a total height of 1950mm, which can be installed normally.

Related Reading:

Suggestions for selecting gas storage tanksMain functions of gas storage tank

Principle of installation sequence for air compressor storage tank and dryer