Integrated electromagnetic valve shower manager

Product Overview:

The shower manager produced by our company, also known as the water control machine, is mainly used in universities, employee dormitories, and rural public water use, achieving the design of one meter and multiple cards.

1、 Shower Manager Structure Description: Length 140mm * Height 70mm * Width 75mm

2、 Installation instructions and precautions for shower manager

The shower manager has an inner diameter of 15 (4 branches), please pay attention to the direction of the inlet end during installation;

Please try to place the shower manager horizontally during installation to avoid inaccurate billing and excessive pressure that may prevent the valve from closing;

The rated power of the shower manager is 12W, and the rated power supply is 12V, 1A;

Can be used in both cold and hot water environments;

Please swipe the system card and settings card before using it for the first time;

3、 Technical parameters of shower manager

Card type: Cards that meet Mifare standards;

Operating distance: 50mm;

Working frequency: 13.56MHZ;

Reading time:<0.3 seconds;

Working voltage: 12v;

Environmental temperature: 0℃--100℃;

Output control mode: 12V 1A;

Card issuance quantity: unlimited;

Billing accuracy: 0.01 yuan/ton;

Maximum cumulative total consumption: 9999.99;

Can set the maximum consumption amount and frequency for the current day and month;

4、 First use and setup of shower manager

4.1 System card flashing

4.2 Brushing the settings card

5、 The shower manager is functioning normally

5.1 Real time flow measurement mode

When the user uses it, place the card in the sensing area, and the shower manager will display the card balance and open the valve. The water will be discharged and charged in real time according to the set rate. The screen will display the card balance, and once the card is removed, the water will be cut off.

5.2 Flow Calculation Mode

When the user uses it, insert the card into the card slot or place it in the sensing area. The shower manager displays the card balance, deducts the current amount, and opens the valve to dispense water.

5.3 Meter Reading Card Data Collection

After the user consumes, the shower manager screen displays the total amount of uncollected data, and a meter reading card is created using software to collect consumption data. Place the meter reading card in the sensing area, and when the shower manager screen displays - PASS -, the collection is complete. The screen displays 0:00.

7、 With the demand of the market, our company has also launched a shower manager (water controller) with Bluetooth function that can be paid through mobile phones. Welcome to inquire!