Characteristics of straw crushing feed machine：
Straw crushingfeed machineThe design is reasonable, the manufacturing quality is reliable, the structure is simple, the operation is convenient, the volume is small, the land occupation is small, the labor is saved, and the electricity is saved. The fully automatic control electric heating device designed can randomly adjust the dry and humidity of the material to ensure the stability of the discharge molding. The straw crushing feed machine improves the work efficiency. The main parts of the straw crushing feed machine are made of wear-resistant materials that have been specially treated, so the straw crushing feed machine can be continuously pressed for production and is durable.
Usage of straw crushing feed machine:
Straw crushingfeed machineSuitable for pressing and shaping various biomass raw materials such as corn stalks, wheat stalks, cotton stalks, rice straw, rice husks, peanut shells, corn cobs, tree branches, leaves, sawdust, etc.
Ten safe usage tips for straw crushing feed machine　
Straw crushing feed machineIt should be fixed on the ground and can be fixed with cement. If the straw crushing feed machine often changes its working location, the crusher and electric motor should be installed on a machine base made of angle steel.
Straw crushing feed machineAfter installation, carefully check whether it is installed properly and whether the straw crushing feed machine is not installed firmly enough. Check if the motor shaft and crusher shaft are parallel, and also check if the tightness of the transmission belt of the straw crushing feed machine is appropriate.
Straw crushing feed machineBefore starting, rotate the rotor by hand to check if it runs smoothly and normally, if there are any collisions inside the casing, if the rotation direction of the rotor is correct, and if the motor and crusher of the straw crushing feed machine are well lubricated.
Straw crushing feed machineDo not replace the pulley frequently to prevent the speed from being too high or too low.
Straw crushing feed machineAfter starting, it should idle for 2 to 3 minutes without any abnormal phenomena before feeding.
Straw crushing feed machineThe feeding should be uniform. If there is any noise, high temperature between the bearings and the machine body, or spraying of material from the straw crushing feed machine, the machine should be stopped immediately for inspection and troubleshooting.
Straw crushing feed machineBefore starting work, the staff should carefully inspect the materials to prevent hard objects such as metals and stones from entering the crushing room and causing accidents. When feeding the straw crushing feed machine, the staff should stand on the side of the straw crushing feed machine to prevent being injured by the ejected debris. When crushing long stems, do not hold your hands too tightly to prevent them from being carried into the straw crushing feed machine.
Before stopping the straw crushing feed machine, stop feeding and wait for the materials inside the machine to be completely discharged before cutting off the power and stopping the machine. After shutdown, the straw crushing feed machine should be cleaned and maintained.
After 300 hours of operation, the straw crushing feed machine needs to be cleanedStraw crushing feed machineBearings, replace oil; When installing engine oil, it is recommended to fill 1/3 of the bearing seat gap, and not exceed 1/2 at most. When the straw crushing feed is stopped for a long time, the drive belt should be removed.

Statement

---------------------------------------------------------------

Note:Straw crushing feed machineThe product performance is constantly improving, and parameters are subject to change without prior notice!

Can log inhttp://www.hlyzjx.comGet detailed information about the device.

Note: Our company can customize various products according to user needsStraw crushing feed machine and feed processing equipmentEquipment.

Order Hotline: