1、 Equipment Introduction
The CT-C hot air circulation oven adopts a high-temperature resistant circulation fan, and the forced hot air heated by electric heating tubes or steam heat exchangers circulates inside the oven, enhancing heat transfer, improving water evaporation rate, and shortening drying time. The entire box adopts a fully enclosed structure, with hot air circulating inside the box, effectively discharging humid and hot air and replenishing fresh air. The oven is equipped with an automatic temperature control system, ensuring precise temperature control.

The box is equipped with an adjustable air distribution plate, ensuring uniform temperature inside the box. Adopting a low-noise energy-saving built-in circulating fan, the operation is balanced and greatly reduces the noise and heat loss of the equipment. The air inlet is equipped with an air filter and comes standard with a dehumidification device.

Factory direct CT-C series hot air circulation oven

2、 Device application
The CT-C hot air circulation oven is specially designed for industrial mass production and is widely used in the pharmaceutical industry for drying raw materials such as active pharmaceutical ingredients, traditional Chinese medicine decoction pieces, extracts, powders, granules, granules, water pills, packaging bottles, etc. It is also suitable for drying dehydrated vegetables, feed, monosodium glutamate seasoning, chemical pigments, rubber, fiber, electronic components, new materials, clothing, food and other industries.

3、 Equipment features

1. The entire box adopts a fully enclosed structure, with hot air circulating inside the box, which is energy-saving and efficient.
2. Adopting a built-in high-temperature resistant circulating fan greatly reduces heat loss and enhances heat transfer.
3. There is an adjustable air distribution plate inside the box, which can adjust the opening up and down to ensure uniform temperature inside the box.
4. The insulation layer is 80-120mm thick and made of ultra-fine glass wool, which meets GMP standards and has low heat loss.
5. The drying car and drying plate are industry standards, and the drying plate mesh disk is suitable for multiple industries with strong interchangeability.
6. Automatic temperature control, timed working hours, mechanized production, stable batch product quality.
Factory direct CT-C series hot air circulation oven

4、 Purchase Tips
1. Heating sources include steam, electricity, far-infrared, and electric steam for users to choose from
2. Usage temperature: Steam heating 50-140 ℃, maximum 150 ℃
3. Electricity usage, far-infrared temperature range of 50-300 ℃
4. Equipped with self-control system and computer control system for users to choose from
5. Common steam pressure 0.02-0.8Mpa (0.2-8kg/m2)
6. Equipped with electric heating, calculate 15KW according to CT-C-I type (2 doors, 2 cars), practical 5-8kw/h
7. Special requirements to be specified at the time of ordering
8. Non standard oven price negotiable
9. If the operating temperature is greater than 140 ℃ or less than 60 ℃, it should be specified when ordering
10. Our factory has a uniform size for drying cars and plates, which can be interchanged
11. Drying tray size: 460 × 640 × 45 (mm) available in flat tray, punched tray, and mesh tray options.

If there are special requirements, handmade plates can be customized. Factory direct CT-C series hot air circulation oven

Nanjing Wanzhong Machinery Technology Co., Ltd. is a key backbone enterprise in China's pharmaceutical machinery, chemical machinery and other industries, located in the prosperous ancient capital of the Six Dynasties - Nanjing. It has a unique geographical environment, adjacent to the Beijing Shanghai high-speed railway, Shanghai Chengdu expressway, and National Highway 312.
Our factory has gathered a group of high-level and high-quality professional talents, adopted advanced management methods, and established a complete quality assurance system. We have advanced product testing equipment, inspection instruments, and processing equipment, as well as an excellent product development environment and production line.
Our factory has rich experience in designing and manufacturing drying equipment, and the various drying equipment produced has been widely used in various fields such as pharmaceuticals and chemical engineering.
Our main business, production, and customized products include: microwave vacuum drying oven, laboratory microwave oven, tunnel microwave drying sterilization machine, vacuum drying oven, hot air circulation oven, ozone sterilization oven, V-type mixer, two-dimensional mixer, three-dimensional mixer, double cone mixer, trough mixer, stir fry machine, washing machine, coating machine, feeding machine, crusher, vibrating screen, and other pharmaceutical and food drying machinery.
Produce high-quality products with the spirit of craftsmanship, ensuring the vitality of every customer with quality. Welcome to the beautiful Nanjing!

1、 Product Name: Hot air circulation oven (one door, one vehicle)

2、 Model specifications:CT-C-0type

3、 Main technical parameters:

External dimensions1580x1160x1960mm(including fan size))

Studio size780x980x1450mm

Temperature range: Room temperature-130℃

Maximum drying capacity of 60kg per time

Heating method: steam+electricity

Steam heat dissipation area of 50 square meters (steam pressure 0.25-0.6mpa)

Heating power 9kw

Circulating fan power 0.45kw/set

1 supporting drying car

24 supporting baking trays

Drying tray size 460x640x45mm Ø 3mm punching tray

4、 Performance and Characteristics

Hot air circulating ovens are widely used in industries such as pharmaceuticals, chemicals, food, agricultural and sideline products, aquatic products, and light industry for heating, curing, drying, and dehydration Such as raw materials, Chinese medicinal herbs, Chinese herbal decoctions, extracts, powders, granules, granules, dehydrated vegetables, etc

The hot air circulation oven is equipped with a low-noise axial flow fan and an automatic control system. The entire circulation system is fully enclosed, with high thermal efficiency and energy saving Under the action of forced hot air circulation, the drying of materials is consistent The heating source adopts steam heating, with low overall noise, smooth operation, automatic temperature control, easy installation and maintenance, small applicability, and can dry various materials. It is a universal drying equipment

5、 Technical requirements for production

1. The box steel structure adopts a frame structure formed by welding steel sections and steel plates to ensure the overall rigidity and airtightness of the box. It is mainly divided into two side steel structures and a box top steel structureThe oven shell adopts1.2mmMade of stainless steel, formed by riveting and welding, with a smooth surface and a flatness of3/100mmThe inner wall of the oven is made ofthick1.2mmStainless steel plate production, argon arc welding forming, then polished and polished The four corners inside the box are all rounded corners with no dead corners, easy to clean, and the surface is flat and smooth

2The insulation layer inside the box is filled with high-quality aluminum silicate fiber cotton,This product has the characteristics of high heat resistance, low thermal conductivity, good chemical stability, and strong thermal shock resistance, thickness80㎜,The surface temperature does not exceed the ambient temperature10℃.

3. The convection wall inside the box is adjustable, and the temperature inside the box is made uniform by adjusting the ventilation gap size of the convection wall The empty temperature inside the box is ± 5 ℃

4. The heating method of the oven is steam, and the steam heating uses a stainless steel steam radiator with a heating area of 25 cubic meters, installed on one side of the air duct inside the box

5. The hot air circulation of the box adopts a low-noise axial flow fan with a power of 0.45kw/unit and an air volume of 350 cubic meters/h/unit, installed on one side of the box The motor adopts explosion-proof motor

6. There is one moisture outlet installed on the top of the box, with a size of 150 × 150mm, and one additional air inlet with a size of 150 × 150mm

7. The oven is equipped with one drying car and 24 drying plates. The drying car is made of 30x30x1.5mm stainless steel square tube, and the drying plate is made of 0.6mm thick stainless steel by one-time stamping. The size of the drying plate is 640x460x45mm