The reverse osmosis pure water equipment adopts fully automatic control mode to reduce the impact of human error operation on the equipment belt. The design of a reduction system in the pretreatment system addresses the irreparable impact of excessive residual chlorine on the reverse osmosis membrane. The selection of reverse osmosis membrane adopts the original imported reverse osmosis membrane from the United States, with a service life of up to 3 years and a effluent conductivity of less than 5us. The pumps selected are domestic Southern pumps and imported Grundfos pumps, which have low operating noise and long service life. We use Dow's professional design software, and the recovery rate can reach over 65%. The high degree of automation, simple operation, stable water quality, and low operating costs have been highly praised by customers.

1. Raw water tank: mainly solves the problem of unstable tap water pressure, reducing mechanical failures caused by frequent start-up or unstable tap water pressure during the operation of the lift pump.

2. Quartz sand filter: Tap water enters from the upper end of the tank and flows evenly from the upper end of the filter layer to the lower end through the upper water distributor. After passing through the filter layer, tap water is separated from the filter layer by the lower water distributor, forming filtered water.

3. Activated carbon filter: The internal structure of the activated carbon filter is identical to that of a quartz sand filter. After adsorption by activated carbon, the residual chlorine in tap water can generally be reduced to below 0.1mg/l.

4. Precision filter: mainly uses a 5us melt blown filter element, which can remove small particles and further create conditions for reverse osmosis inlet water.

5. High pressure pump: provides the necessary power for reverse osmosis operation.

6. Reverse osmosis system: The reverse osmosis system is the core component of reverse osmosis pure water equipment. In the design of reverse osmosis, the number, brand, and arrangement of filter membrane elements are mainly considered.

7. Pure water tank: used for storing pure water.

1. Automatic water replenishment from the incoming water tank: When the liquid level in the incoming water tank reaches a low level, automatic water replenishment is performed. Stop replenishing water when it reaches a high level

When the water level in the incoming water tank reaches a certain level, the system starts working, and stops when the pure water tank is full.

When the incoming water tank is at a low water level, the water shortage protection is activated, and the system completely stops. Both manual and automatic operations cannot be performed.

4. The reverse osmosis system should be cleaned every time it is turned on, and the cleaning time should be controlled at around 30 seconds (the time is adjustable). After running for a period of time, the reverse osmosis system should be cleaned regularly (the time is adjustable).

When the pre-treatment pressure does not reach 2kg, the reverse osmosis host is protected by low pressure. Single stage reverse osmosis water treatment equipment 5T/H

　　Manufacturing industry:Automotive glass, steel, paper, textile, etc

　　Power industry:Boiler thermal power generation cooling cycle, etc

　　Electroplating industry:Coated lighting, cooling, metal plating, LED lights, etc

　　Electronic industry:Electrical chips, circuit boards, microcontrollers, electronic components, etc