JJ-4Six way synchronous electric mixer：Equipped with advanced permanent magnet DC motor and power increasing speed control circuit, it has the advantages of increasing torque at low speeds, stable speed, no noise, continuously adjustable speed, and long-term continuous use. The stirring rod is made of high-quality stainless steel, with strong corrosion resistance and durability.

Product features:

① Used for laboratory dispersion and mixing;

② Easy to operate, easy to clean and maintain;

③ Large capacity mixing capability, high quality;

④ Simple design and easy to use.

⑤ Digital display speed.

JJ-4Six way synchronous electric mixerTechnical Parameter

Power supply voltage: 220V 50Hz

Motor power: 140W

Timing: 0-120min

Speed: Start up~1600 revolutions per minute (speed infinitely adjustable)

Usage

Firstly, install the stirring rods on the six shafts and tighten them, then turn off each working switch. And adjust the speed knob to the initial position, place the solution bottle to be stirred on the lifting frame, raise it to the appropriate height, and align the stirring rod with the center. Turn the timing knob to the ON position or the desired timing time, turn on the power, close the power switch, and gradually adjust from low speed to high speed to the desired working speed.

matters needing attention:

1. Be sure to use a grounding wire when using it.

2. If you find that the mixing rod is not concentric or the mixing is unstable during work, please turn off the power and tighten the clamp to make the mixing rod concentric.

3. When using volumetric flasks with a diameter less than 80mm, additional fixtures are required to prevent the bottle mouth from colliding with the mixing rod and breaking.