Small CO2 laser marking machine-Fornitore globale

Tianxiong Laser, 1st Floor, Poly Industrial Park, No. 10 Huiyuan Road, Wangniudun Town, Dongguan City

Introduction to Small Carbon Dioxide CO2 Laser Marking Machine Models

The small CO2 laser marking machine is a gas laser that uses CO2 gas as the medium, abbreviated as CO2 laser. The wavelength of CO2 laser is 10.6um, belonging to the mid infrared band, CO2 lasers can achieve high laser power,. It uses Co2 gas as the working substance. Charge Co2 gas into the ceramic discharge chamber and release laser from the gas molecules under high voltage charging of the electrode. Amplify the released laser energy and generate a laser beam. Automatic marking is achieved by controlling the galvanometer to change the laser beam path through a computer. The core components of the small carbon dioxide CO2 laser marking machine are all imported, ensuring long-term trouble free operation of the equipment.

Structural Analysis of Small Carbon Dioxide CO2 Laser Marking Machine

Components of a small CO2 laser marking machine: galvanometer, laser, optical lens, laser control card, computer, small rack
1. Vibration mirror: The vibration mirror of the small CO2 laser marking machine adopts imported 10.6um band coated vibration mirror from 26 company, which is driven and assembled by imported motor. It has the advantages of high precision, fast speed, minimal light loss value, and fast heat dissipation.

2. Laser: The small CO2 laser marking machine uses imported metal RF tubes and 5V low-voltage RF control to control the laser power. The output is stable, and the laser intensity will not change due to voltage changes, with a long lifespan.

3. Optical lenses: For the optical lenses of small CO2 laser marking machines, our company has always used optical lenses coated with imported coatings from Company 26, which have high pass rates and low light loss.

4. Laser control card: The small CO2 laser marking machine adopts digital card control, using the differential signal of the control card to control the output intensity of the RF tube. The laser control card immediately transmits the corresponding signal after receiving the signal from the computer.

5. The computer and small CO2 laser marking machine adopt a small industrial integrated computer, which is more stable than ordinary computers.
6. Small Cabinet: The cabinet of the small CO2 laser marking machine is very small and easy to carry, but its functions are the same as ordinary machines, with the same amount of accessories and materials used. The only difference is that the structure is compact, and a heat dissipation duct is made using the principle of air convection.

Comparison Table of Parameters for Small Carbon Dioxide CO2 Laser Marking Machine

average output power	30W	60W	100W	150W	300W
wavelength	9.3um/10.64um
Pulse width/Q frequency	Fixed pulse width/1kHz-100KHz
Average power/peak power	30 watts/40 watts	>60 watts/>90 watts	>100 watts/>300 watts	>150 watts/>400 watts	>300 watts/>600 watts
Marking format	110 × 110mm optional (70x70mm 150x150mm 200x200mm 300x300mm) Dynamic focusing format: 300mm * 300mm -1200mm * 1200mm
repeatability	＜200μ
Carving line speed	≤7000mm/s
Cooling method	forced air cooling	water-cooling	water-cooling	water-cooling	water-cooling
Minimum character height	0.2mm		0.04mm
Laser tube type	Imported metal RF tube (inflatable and reusable)
Overall dimensions (L * W * H)	800mm × 680mm × 1200mm (depending on the specific situation)
power supply	AC 220V 50KHz
upgradeable	Electric lifting manual two-dimensional worktable, electric two-dimensional table rotating fixture, red light focusing

Application scope of small CO2 laser marking machine

The small CO2 laser marking machine can mark various non-metallic materials and partially electroplated metal products, such as bamboo products, wood, acrylic, leather, glass, building ceramics, rubber, silicone, paper, plastic, and so on. Widely used in industries such as pharmaceutical packaging, food packaging, beverage packaging, plastics, textiles, leather, wood, handicrafts, electronic components, communications, clocks, glasses, printing, etc. Suitable for marking, carving, hollowing out, and cutting products made of various non-metallic materials. Various types of text, symbols, graphics, images, barcodes, serial numbers, QR codes, etc. can be marked and engraved.

Precautions for using a small CO2 laser marking machine

When using a small CO2 laser marking machine, it is strictly prohibited to look up from below the laser galvanometer, as this may cause permanent damage to the eyes due to the laser beam entering.
2. When the small CO2 laser marking machine is working, it is important not to suddenly turn off the power, as this may cause the laser software to be lost or even the computer to fail to open properly. The hardware part of the machine may also be damaged. It is recommended to equip it with a PUS power stabilizer.
3. Do not frequently move the small CO2 laser marking machine, as the optical components inside the machine have been adjusted for position and angle at the factory. Frequent movement of the position can cause the internal components to change angle due to vibration, making the machine unusable.
When it is not applicable for a long time, the main power supply needs to be disconnected.
5. Do not browse high-risk websites on the computer of a small CO2 laser marking machine to prevent laser engraving with garbled characters after being infected with viruses.
6. Machine equipment needs to be effectively grounded. Some customers' power sockets do not have grounding wires, which can cause static electricity and users may frequently come into contact with static electricity.
7. When working with a small CO2 laser marking machine, do not place your hands within the working range, as the 10.64um wavelength laser beam of the small CO2 laser marking machine can burn your hands. If it hits your hands within the focal length range, it will directly break the skin and flesh, so be careful.

Small CO2 laser marking machine after-sales service

Delivery list for small CO2 laser marking machine: delivery note, metal adjustment plate, tool set, training service list;
After sales and service of small CO2 laser marking machine: home delivery, technical engineers on-site installation, debugging and training, lifelong technical support, lifelong software free upgrade, 2-hour after-sales response, on-site processing within 24 hours, after-sales phone: 400-829-662