Solar simulator for photovoltaic testing
This light source complies with the ASTM (American Society for Testing and Materials) laboratory light source standard, A level spectral output.

Main features:

All products undergo calibration traceable to NIST standards before leaving the factory
+/-5% uniformity collimated light
Grade A spectral output

Application:

Semiconductor testing
Photovoltaic testing
Research on material aging

16S is a ready to use photovoltaic cell testing light source. 16S-300-002 has all-optical capability
Spectral "A" level spectral output (AM1.5). 16S-002 is equipped with a vertical beam adapter that can
The beam changes direction and shines vertically downwards. Typical spot size 2.25 inches, 1 solar input
Output intensity. Users can customize the size of the light spot.
By adjusting the knob on the power supply, the output light intensity can be adjusted within a range of 80% -100%. Through the attenuation toolkit provided by Solar Light, it is possible to
Adjust the light intensity by 10% -100%.
16S accurately reproduces the full band solar spectrum. Meets the latest ASTM light source standards, with many ASTM standards requiring G151 and G155
It can be achieved by 16S-002. 16S-002 can test solar cells according to ASTM standards E948-95 and G173.
The main features are as follows:
150/300 watt xenon arc lamp
150 watt XPS 150 power supply/300 watt XPS 300 power supply
AM filter (NIST traceable light source verification, compliant with ASTM testing)
Room Light Source Standard
• Built in igniter - used for xenon arc lamp ignition
High performance optical components (for collimation and uniformity control)
The new "A" grade AM1.5 filter can achieve a 3cm spot size
Air mass 1.5 = 952 w/m2
Energy output diagram of 16S 150/300 Air mass 1.5 (circular spot output)
Output spot size/shape
2 cm round
(Horizontal or vertical output)
3 cm round
(Horizontal or vertical output)
6 cm round
(Horizontal or vertical output)
Output area 3.142 square centimeters 7.068 square centimeters 28.27 square centimeters
150 watt system strength 4000 w/m2 2000 w/m2 500 w/m2
300 watt system strength N/A 4000 w/m2 1000 w/m2
Note: Vertical output is an option for the 2cm and 3cm models and is not included in the standard 2cm and 3cm model configurations. PMA2144
The daily intensity meter will saturate when it exceeds 4000 w/m2, and an attenuation filter is required.