1Split type vortex flowmeterOverview of
Split type vortex flowmeterIt is a measuring instrument with high measurement accuracy, simple installation, low maintenance, and wide applications. Currently, it is widely used in industries such as petroleum, chemical, metallurgy, textile, urban construction, and energy. The sensor outputs a frequency signal, which is usually combined with a computer or flow integrator to form a flow measurement system. The transmitter output of the flowmeter is a 4-20mA standard signal proportional to the volumetric flow rate. It is usually combined with a computer to form a flow measurement system or other flow integrating instruments to form a vortex flowmeter
The sensor/transmitter of the split type vortex flowmeter is installed on the pipeline, and the flow integrator or computer is installed in the control room and provides power to the vortex flow sensor/transmitter. The two are connected by shielded cables. The circuit part is separated from the body. The circuit part is installed in a location with good environmental conditions and easy detection. It is connected to the body with a dedicated cable of ≤ 10m at the factory.

IISplit type vortex flowmeterThe functional characteristics of
1. The medium has good universality and can measure steam, gas, and liquid.
2. Steam: saturated steam and superheated steam.
Gases: various gases such as air, oxygen, nitrogen, natural gas, liquefied gas, ammonia, chlorine, alkanes, alkenes, hydrocarbons, etc.
Liquids: various chemical liquids such as water, softened water, gasoline, kerosene, diesel, liquefied petroleum, liquid ammonia, phosgene, alkanes, alkenes, alcohols, aldehydes, etc.
3. Intelligent integrated design, capable of displaying instantaneous flow rate, cumulative flow rate, and instrument coefficient on site.
4. Micro power dual power design, with permanent storage of internal parameters.
5. The detection probe of the split type vortex flowmeter adopts an optimized combination structure and special process technology packaging, with superior anti vibration performance.

6. The piezoelectric element is embedded in the probe body, with no filling material inside, and its performance is stable and reliable.
7. The detection element of the split type vortex flowmeter does not come into contact with the medium, has no movable parts, has low pressure loss, and has a long service life.

IIISplit type vortex flowmeterTechnical parameters: